> 
 > 

2007 Fountain Mercury 35 Executioner

Posted on by

Each 35 Executioner comes with a stylish color, coordinating dash, bezels, throttles and matching steering wheel. Embroidery adorns the seat backs, and a custom X logo is inlaid on the engine hatch. Custom graphics accent the Executioner’s exterior, and a stainless steel rub-rail insert give it an added touch of elegance. Powered with twin Mercury 425hp 496 cu.in. engines, the Executioner runs an astonishing 68 knots (78 mph) with amazing low-end pulling power and midrange throttle response.

The spacious cabin includes a v-berth which sleeps two, u-shaped cabin sofa, enclosed head and a galley with cooler and pressurized sink. This boat carries an incredible brand image and is one of the best values in the marketplace.

The 35 Executioner offers the retro look incorporated with the latest in performance and design technology.

Fountain Mercury 35 Executioner

Features


Standard
Batteries, twin, heavy duty/jumper cables and receptacle
Bilge blowers, (2)
Bolster seats w/electric drop down
Cabin lighting
Carpeting, cockpit, customized w/embroidered Fountain logo
Cockpit cover, form fitted
Dash with monster gauges; carbon fiber, color coordinated throttles, gauge rims, wheel hub & steering wheel
Engine compartment w/lighting and motorized hatch
Engine room billet accents includes: battery box w/chrome engraved step pad, fender holders, hatch rams, water fills (blue only), trim pump caps, motor well panel, sea strainer
Fresh water flush
Fuel tanks, heavy duty, baffled, 3/16 in. thick aluminum; foamed, glassed & bolted in position w/stainless steel pickups, 156 gal. total capacity
Galley w/sink and cold water pressure system
Hand laid composite hull and deck manufactured w/multi-directional fiberglass, w/high density coring and Interplastic vinyl ester resin and w/hull and deck laminated, thru-bolted, screwed and sealed together w/heavy duty marine sealant/adhesive
Horns, electric
Ice chest, built-in, insulated
Propellers, stainless steel to match engine and drive package
Rubrail with stainless steel insert
Sirius satellite radio (tuner & antenna)
Steering, heavy duty hydraulic, offshore hi-performance, tie bar, external
Sun deck, upholstered over engine hatch w/custom "X" logo
Throttles, billet race
Trim switch on throttles
Windshield frame, powder coated
Battery switches, two, parallel, explosion proof
Bilge pumps, two, 12 volt DC, 1200 GPH automatic/manual pump
Bow lights, pop-up with deck bezels
Cabin, customized
Cockpit billet accents include: step pads, vents, & cockpit rails
Compass, electronic digital
Depth gauge
Engine mounts, heavy duty plate
Fire extinguisher, automatic
Fuel filters, (2) w/water separators
Fuel vapor detector
Graphics, standard selection
Head, enclosed w/porta potti
Hour meter
Instrumentation, heavy duty Livorsi gauges w/integrated warning lights, GPS speedometer
Rails, bow and stern, 316L stainless steel, thru-bolted
Sea strainers
Slimline cleats, pop-up with deck bezels
Stereo, marine AM/FM CD w/four marine speakers
Super ventilated positive lift hull, single step
Trim indicators, mechanical for drives and tabs
Trim tabs, heavy duty hydraulic, offshore hi-performance
Windshield, tinted

Fountain Mercury 35 Executioner

Optional
CE Certification Kit
Deck Graphics
Faired Engine Compartment
Hatch, Colored Mirror With Logo
Oscillating Fans in Cabin (2)
Refrigerator in Wet Bar
Shipping Cradle
Shower, Transom (Fresh Water)
Storage Cover over Gunwale

Specs


LOA: 35 ft. (10.67 m)
Beam: 8 ft. & 6 in. (2.6 m)
Weight dry: 8,500 lbs (3,855 kg)
Fuel capacity: 160 gal (606 l)
Frsh water capacity:
13 gal (49 l)
Draft w/drive down: 35 in. (0.9 m)
Recommended power: Twin Mercury 425 HP 496 HO w/Bravo 1-X
Speed max.: 68 knots (+78 mph)
Hull warranty: 6 Years
Cruise (fuel) at 50 knots (58 mph): 36 gph
WOT (fuel) w/Twin 425 Mercury: 70 gph at 68 knots (+78 mph)
Max. cruising range: 232 miles at 90% capacity

Fountain Mercury 35 Executioner



*Registration is required to post in this forum

Back to top