The German tuning house, MTM, has just revealed a new performance upgrade for the Audi S4->ke1088 and A6 that are equipped with the automaker's 3.0 Liter TFSI six cylinder engine. Thanks to a M-Cantronic system the S badged entry level sedan now makes 430 HP, that is almost 100 HP above the stock output, all without having to turn a wrench and get your hands dirty. The same computer retune is available for the TFSI equipped A6s, but in the larger sedan, the increase is only good for about 70 HP.

Besides the improved performance of the smart engine software, MTM is also offering their new signature sport tuned exhaust system for the vehicles wearing a four ringed emblem. The exhaust can be finished off with either a quad tip, oval tailpipe or a blacked out unit so that you won't see anything at all. Completing the handling part of the performance upgrade, MTM also equips the Audi's with a set of 19 to 21 inch Bimoto wheels with a big brake upgrade underneath as well as an MTM height adjustable coilover suspension.

Press release after the jump.

Press release

Just on the market, MTM inspires the new high-tech 3.0 TFSI of Audi with more power and driving dynamics. The V6-aggregate in the S models with 333 hp becomes a real athletes heart after the MTM treatment, with this you are also allowed to challenge the bigger RS models with their V8 engines. 430 hp and 515 Nm were measured on the MTM dynamometer.
Beside improved performance MTM also offers for the new S models exhaust systems with different optics (4-pipe, oval, black) and bimoto wheels (19” and 21”) as well as MTM height adjustable suspensions and MTM brake systems.

For the customer of the new A6 with the 3.0 TFSI power train MTM offers for the first time the M-Cantronic for petrol engines. At the same time not only the increased efficiency of 70 hp is pretty impressive (series 290 hp, MTM about 360 hp) also the power expansion and characteristic.
To make it all clear: driving dynamics and power expansion are on a definite higher level without a complex conversion or reprogramming of the control unit. Assembly and disassembly are possible in short time and with this MTM now offers for commercial used vehicles a tuning solution which can be removed at the end of the leasing time.