Je Design Progressor based on the Porsche Cayenne

Posted on by
Je Design Progressor based on the Porsche Cayenne

The German tuners JE DESIGN modify everything in the Volkswagen family. This time they chose a close cousin, the Porsche Cayenne and made the the PROGRESSOR. The most noticeable feature of this car is the broader stance than the typical Cayenne. The body was widened by 60 mm at the front, 80 mm at the back and given a set of huge 22-inch rims.

Press release after the jump.

Press release:

Je Design Progressor based on the Porsche Cayenne

Progress can not be stopped, especially when it is dashing forward in such a broad and powerful way. The automobile refiner JE DESIGN converts the current Porsche Cayenne (Type 957) into the PROGRESSOR and shows which potential can be release from the serial Porsche.

The PROGRESSOR presents itself significantly broader and more dominant than the standard Cayenne. This impression is already confirmed by a first glance at the front skirt with its LED daylight running lights, the side skirt and the rear skirt extension. At the front, voracious air inlets and fierce headlamp masks confirm that the PROGRESSOR is not only up for games.

Je Design Progressor based on the Porsche Cayenne

Also, the undercoating which protrudes into the front skirt is bicoloured and therefore emphasises the challenging character of the automobile.

The PROGRESSOR does not only pretend to be broader, it really grew. The track width at the front axle extended by enormous 60 millimetres, and even by 80 millimetres at the back axle. This goes hand in hand with extended wings, adapted side skirts with integrated LED door sill lamps and the robust wheels SUV-Select. These cast wheels in one piece measure 10x22 inches and are equipped with high performance tyres sized 295/30 R22 XL. JE DESIGN has engineered the wheels with its classic five-spike design especially for king-sized automobiles like the Cayenne. The wheels with the graphite gloss finish perfectly match the white racing colour varnish of the PROGRESSOR.

Je Design Progressor based on the Porsche Cayenne

The sportive appearance is not only accentuated by the additional width, but also by the additional depth of the car. With its reduced sport springs, an electronic lowering kit or a version 3 coilover, the PROGRESSOR can be lowered between 35 and 70 millimetres. Therefore, the sportive appearance is also honoured by the driving dynamics.

The rear exterior is by no means docile at all. The perfectly adjusted rear skirt extension sets a dominant mark with its six integrated LED lights and its diffuser look. Anyway, most motorists only see the four-pipe exhaust system of the PROGRESSOR which protrudes through the rear skirt with its chromed oval pipes.

Je Design Progressor based on the Porsche Cayenne

With the PROGRESSOR, JE DESIGN presents a masculine car which even makes the serial Cayenne look pale. The running gear and appearance of the refined automobile perfectly match the power provided by Porsche.

Je Design Progressor based on the Porsche Cayenne

*Registration is required to post in this forum

Back to top