> 
 > 
 > 

2009 Mazda3 and MazdaSpeed3 SEMA Editions

Mazda came at SEMA Show with two customized models: a Mazda3 and a MazdaSpeed3. Both models are painted in a Crystal White Pearl base coat with soft gray tone graphics to mimic the new MAZDA3 World Challenge race car.

Mazda3 and MazdaSpeed3 SEMA Editions

The pearl white is combined to a black paint on the grille inserts, side mirrors, fog lamp bezels, the roof panel, and the formerly chrome interior of the front lamps. Besides that the cars get tinted windows, dark red taillight lenses and 19x8-inch wheels.

The Mazda3 uses a 2.5-liter MZR engine with a Tri-Point turbo kit and a rugged cast iron turbo manifold. This way the output was raised to 250 hp. On the other hand, the Mazdaspeed3 is already using a AEM cold-air intake that is increasing the output with 20 hp.

Press release after the jump.

Press release

With the launch of the all-new 2010 MAZDA3 and MAZDASPEED3, a small team of designers and engineers at Mazda R&D in Irvine, Calif., decided to celebrate with a pair of special projects, debuting for the first time at the 2009 Specialty Equipment Market Association (SEMA) Show.

Mazda3 and MazdaSpeed3 SEMA Editions

Figuring out how to commemorate the completion of the MAZDA3 was easy. Mazda’s line of exciting, fun-to-drive cars are born from the passion of the people who design them, so starting with a MAZDASPEED3 and a 2.5-liter MAZDA3s the team took its knowledge of the Mazda parts bin and its close relationships with MAZDASPEED Motorsports suppliers, looked in the mirror, and decided to build a pair of tuner cars that show its own vision of the MAZDA3.

Both cars are painted to mimic the new MAZDA3 World Challenge race car, but in a more subdued Crystal White Pearl base coat with soft gray tone graphics. The scheme is a modern twist on the famous Renown graphics used on the Mazda 787B that won Le Mans in 1991.

Exterior details, including grille inserts, side mirrors, fog lamp bezels, the roof panel, and the formerly chrome interior of the front lamps are all given a bright black paint treatment. Combined with tinted windows, and dark red taillight lenses, the dark details tighten the car visually, emphasizing the MAZDA3’s taught, muscular shape much like a tailored black suit on an athlete.

Mazda3 and MazdaSpeed3 SEMA Editions

Both cars roll on 19x8-inch wheels with 225/40-19 Bridgestone Potenza RE050A tires straight off the RX-8 R3. The wheels are forged aluminum, giving them strength with exceptional light weight.

The sedan was sent to Tri-Point Engineering for a boost in power. Between World Challenge races, Tri-Point installed their turbo kit, utilizing a rugged cast iron turbo manifold feeding a high-efficiency Garrett GT2871R ball bearing turbo. At a mild 10 psi of boost, the 2.5-liter MZR engine is making well over 250 horsepower at the wheels (final tuning is still being finished).

To handle this extra power, the front brakes were replaced with rotors and calipers from a MAZDASPEED3, while the rear rotors and calipers were sourced from a MAZDA5. Double-adjustable coil-overs from KW Suspension, paired with a Tri-Point adjustable rear stabilizer bar bring the handling back into harmony with the engine’s higher output.

Mazda3 and MazdaSpeed3 SEMA Editions

The MAZDASPEED3, already capable of 155 mph, was already nearly fast enough. An AEM cold-air intake bumps output about 20 horsepower, but otherwise, the powertrain remains untouched. Suspension is again KW coil-overs, but this time with modified top mounts on the front struts to increase camber and provide additional cornering grip. Four-piston Stoptech calipers and floating two-piece rotors nearly identical to those on the World Challenge car are used, since the car’s original brakes were transplanted to the 4-Door.



*Registration is required to post in this forum

Back to top