Get ready to spend some cash because Inden Design is ready to take it. They’ve developed a tuning package for the Mercedes SL63 AMG that will leave your wallets empty, but your Mercedes stacked. Their kit includes a new body kit and interior and technical changes.
The body kit starts off with a front spoiler bumper, fenders with ventilation openings, a complete hood with air intakes, sidesmolder-learn, a tailspoiler, and rear widening. This “base” body kit will cost the consumer € 19,900. Not a bad starting point, but it starts to get a little out of hand from there. If the consumer wants to add a hood, they’ll need to add € 3,500. A tail diffuser in carbon and a front flap of PE will add € 800 and € 999, respectively. Unfortunately, it doesn’t end there for the money the consumer will have to spend. Assembly of the package will run € 8,000 and adding a lacquer finish inclusive putty work will be € 7,500.
Hit the jump for some more calculations and the press release.
We wish it would end there, but it simply doesn’t. If you have the money, then you won’t care. The next piece that Inden Design can add to the Mercedes SL63 AMG is a set of multipart Black Saphire light alloy wheels in 20 inch in size 11×20 inch and 13×20 inch with 275/30 R20 and 325/25 R20 for € 13,200. Raising the vehicle by 20mm with the use of a modified controlling of the ABC chassis will run € 1,550 for an inclusive installation. Inden Design also says they can increase the output of 560hp and 670Nm if the customer so chooses, but they don’t specify what numbers they are capable of receiving.
Anyone need a calculator yet? Hang on, we’re not done.
The rest of the package just costs cents compared to the more premium components. You can get a back driving camera for € 900, day driving lights for € 420, and Black Saphire high-grade steel exhaust embellishers for € 1,200. In the interior the consumer can add individual leather equipment, exclusive accessories for the cockpit, and Multimedia system.
The total package for the Mercedes SL63 AMG will run the customer a little under € 60,000 and that’s not counting the price of the car. We have to admit, it’s a little too steep for us, but that doesn’t mean someone else isn’t going to just eat this up. To each his own.
The SL 63 AMG is hardly to be over-bid in puncto sportyness in its class. No matter how one looks to the changes, with the INDEN Design Black Saphire change kit was added now in optics and performance a generous portion of driving fun. This vehicle is an unusual concept - already at first sight the Black Saphire convinces of INDEN with a Design, which connects and to an unmistakable overall view leads futuristic and sporty elements in such a way.
The production quality of the body components and their fitting accuracy are here excellent. To the body equipment belongs a front spoiler bumper, which
slides perfectly along the body and which supports the look again. Thus not yet enough: there are fenders with ventilation openings, a complete hood with air intakes, sidesmolder-learn, to examine a tail apron with diffuser, a tailspoiler as well as rear widenings.
The body kit has a value of 19.900 euro for additional 3,500 euros you can get a hood, for 800 euros the tail diffuser in carbon and for 999 euros a front Flap of PE in addition.
The assembly of the body parts and the various adjustment work is separately calculated with 8,000 euros and the lacquer finish inclusive putty work with 7,500 euros.
Thus INDEN Design proves the experience in the body area again and successfully uses the know-how.
Now the SL goes into a new round, because after the vehicle was outwardly revised, also new for example the sharpened wheel set.
A further important contribution to the exclusive optics and performance makes the multipart Black Saphire light alloy wheels (13,200 euros inclusive sport tires) in 20 inch.
These were installed in the quantity 11x20 inch and 13x20 inch with 275/30 R20 and 325/25 R20 high speed tire of Dunlop.
So that the driver can also use the required potential, a modified controlling (1,550 euros inclusive installation) of the ABC chassis makes a sinking for the body possible. Starting from 70km/h the chassis will be raised around 20mm for improvement of comfort and values of axlegeometry.
The full package is completed with a back driving camera (900 euros), day driving lights (420 euros) and suitable Black Saphire high-grade steel exhaust embellishers (1,200 euros).
When desired an increase in output on 560 HP and 670Nm can be accomplished with INDEN Design. As another extra INDEN Design worries also around the adornment of the interior.
For an adequate environment to feel good in the interior provides individual leather equipment, exclusive accessories for the cockpit and when desired also a Multimedia system.