> 
Husqvarna TE

Husqvarna TE

Posted on by Sulthoni

The Husqvarna TE 310 R earn its placed among the top dogs in the segment after has dominated the Enduro World Championship E2 class. However, Husqvarna decided to raise the bar even higher and put its engineers to work once more. As a result, the new 2013 Husqvarna TE 310 R comes with a completely reworked engine which offers more torque and power through the whole rev range.

These performances were achieved by using a new cylinder head and Keihin injection. Besides the improved power and torque levels, the changes also affect the ignition lock and the hot-start-lever which are no longer needed.

On the safety side of things the 2013 Husqvarna TE 310 R receives standard handlebar protection, stiffer radiators and a magnet in the crankcase oil plug. You also get softer handgrips for the handlebar.

Hit the jump for more information on the 2013 Husqvarna TE 310 R.

Posted on by Sulthoni

The Husqvarna TE 250R has conquered a lot of fans since its inception and many consider it one of the most capable bikes in its class. The motorcycle has already proven its value wining the 2010 and 2011 WEC (World Enduro Championship) E1, so it certainly deserves its good reputation. What even better, is that the company decided to improve this successful model even more. Thereby, the Husqvarna TE 250R received a new, high performance cylinder head and fuel injection system for 2013. As a result the bike gets improvements in power delivery and throttle response, as well as a significant 8% increase in both power and torque figures.

On the other hand, Husqvarna’s engineers have spent a lot of time to improve the motorcycle’s safety. One of the most significant upgrades made in this department is the fresh handlebar protection which is offered as standard equipment for 2013. The bike has also received stiffer radiators and a new magnet in the crankcase which improve the reliability.

Hit the jump for more information on the 2013 Husqvarna TE 250R.

Posted on by Sulthoni

The 2013 Husqvarna TE449 is powered by a strong 4 valve, dual camshaft engine forged using the company’s experience in off road racing. Fuel delivery is managed by an electronic injection system and you also get two exhaust silencers which are Euro 3 compliant.

Compared to the old generation, the new one uses more 25CrMo4 chrome-moly steel to reinforce the steering head, the seat rail and engine mounts. On the other hand, the bike also features new suspension settings and the rear Kayaba monoshock is shorter by 4 mm, further reducing seat height. The front suspension has been improved as well, and now it gets progressive dampening.

The stopping power is assured by Brembo brakes. Up front you get a 2600 mm disc with twin piston floating calipers, while out back there is a 240 mm disc paired with a single piston floating caliper.

Hit the jump for more information on the 2013 BMW Husqvarna TE449.

Husqvarna has always strived to innovate and bring new ideas to the world of off road motorcycles. Now, as always, the motorcycle brand with the longest tradition in the world in the Off Road sector is fully committed to the ongoing research and development of the perfect off road bike: easy to use, ready to race and easy to maintain.

The design of the new 449/511 range outstrips that of other off road models and stands out immediately for its looks, exclusive layout and cutting-edge technology. A range of Husqvarna Special Parts will be available, developed by Husqvarna to provide the best combination of lightness, durability and performance to allow Husqvarna fans to personalise their bikes and offer them the ingredients for racing success.

Posted on by Maxx Biker

The exhibition in Barcelona was a perfect opportunity for Husqvarna to thrill its fans with two models that have just received green light for future production. The new TC 450 and TE 310 have been displayed for the first time in front of national press and audience by Andrea Bartolini and current MX3 riders Thomas Allier and Christophe Martin. Aiming a sweeter spot in the rider’s hearts, the revolutionary TE 310 enters the scene with a new engine capacity situated half way between a (...)
Posted on by Maxx Biker

For 2008, Husqvarna orientated on providing a better riding position, improved handling and stress on the frame, as well as delivering more powerful engines. It succeeded by moving the footrest forwards by 15mm and adjusting a steering angle between 26° and 28° while the rear suspension is brand new. But still, the masterpiece remains the fuel injected engines fitted on the TE450 and TE510. They have also been improved for better functionality and reliability.

Posted on by Maxx Biker

For 2008 Husqvarna takes all its Enduro models to a whole new level and the TE 250 is one of the priorities. The key to its success is, of course, the fuel injection system which makes the bike feel like it is on steroids, but we shouldn’t neglect the fact that all that muscle is being properly valued by a completely new chassis.

Posted on by Anthony Kodack

The Husqvarna TE 610IE lines up with the WRE 125. This new model has been designed to fill a gap in a particularly interesting sector of the motorcycle market – that of the 600 cc four-stroke, single cylinder, off-road machine.


Back to top