"Serious touring" - the BMW F 800 ST shows you how much fun you can have with common sense. No matter where you want to ride, the sharp-handling F 800 ST gets you there, mile after mile.

2006 BMW F 800 ST

Specifications
  • Make: Array
  • Model: 2006 BMW F 800 ST
  • Engine/Motor: Water-cooled, 2-cylinder, 4-stroke, four valves per cylinder, two overhead camshafts, dry sump lubrication
  • Horsepower: 85 HP@ 8000 RPM
  • Torque: 63 lbs/ft@ 5800 RPM
  • Transmission: 6-speed
  • [do not use] Vehicle Model: Array

Riding a motorbike is simply great fun. Whether you take a short sporty tour cross country, a trip through the city or a long holiday trip with luggage. That's right - every ride means pure pleasure! This kind of versatility requires an all-rounder which gives the rider whatever is needed - both on winding neighbourhood roady and for fast motorway travel. But common sense is important too: economy, reliability and no complications are just as important as a great visual appearance and pure fun on the road - whether in the city or for sporty weekend tours. The BMW F 800 ST is just such a universal talent, combining pleasure and common sense.


The F 800 ST, the new medium category sports touring bike, also has touring-oriented equipment. Unlike the sporty F 800 S there is full trim, a high windshield, an aluminium luggage bridge as standard. The raised handlebars of the F 800 ST ensure an ergonomically favourable seating position. This model's comfort defines new standards in the medium category and means it is predestined for lengthy trips - either singly or with a pillion passenger.


The dry weight of the F 800 ST is under 190 kg, with a road-ready (DIN empty) weight below 210 kg. The two F models only differ in these technical specifications.


The newly designed 2-cylinder in-line engine, developed in collaboration with Bombardier-Rotax GmbH as a 4-valve unit, is also installed in the F 800 ST. A top performance figure above 60 kW (more than 80 bhp) and the corresponding revving capacity ensure that more ambitious sporty requirements are fulfilled. The high compression ratio of 12:1 and a combustion chamber design based on the new K engine mean that combustion is effective and low in emissions, as well as ensuring reduced fuel consumption.


The already well-established toothed belt drive (F 650 CS) has been chosen as the rear wheel drive for the new model series. Being maintenance friendly, smooth-running and light, it provides the optimum in terms of durability, efficiency, space requirements and weight in this performance class. A closed-loop three-way catalytic converter, state-of-the-art digital engine electronics and optional ABS are of course available too.


Standard equipment:

6 Speed Gear Box

Cast Aluminum Wheels

Closed Loop 3 Way Catalytic Converter

Diagnostic Interface

Digital Engine Management (BMSK)

Electronic Immobilizer

Fuel Tank Located Under Seat

Full Fairing

High Performance EVO Brake System

Info Flat Screen

Low Maintenance Belt Drive

Luggage Rack

Power Socket

Saddlebag Mounts

Side Stand with Starter Inhibition

Single Swing Arm made of Cast Aluminum

Single Wire System

Stainless Steel Exhaust System

Telescopic Fork


Available equipment:

Heated Hand Grips

ABS

Tire Pressure Monitoring (TPM)

On Board Computer

White Turn Indicator

Anti - Theft Alarm

Dual Bench Seat - Low (31.1 Inches)

Center Stand


Accessories:

Heated grips

Sports pannier mounting kit

Pannier fastenings/mounting kit

Top pannier

Tank bag

Main stands

Supplementary toolkit

Low seat

Paddock stand/adapter

Scuff guard

Navigator holder/mounting kit/navigator cable

Anti-theft alarm system mounting kit

Holder for anti-theft alarm system

White indicators

White LED indicators

Low windshield

Cord for helmet holder

Passenger seat cover (primed)

TPC (Tyre Pressure Control)

Safety bar kit


-----

Features


Fun factor 86 Nm. The engine.

Instantaneous power.


The Parallel Twin fitted to the BMW F 800 ST is a new high-tech, middleweight power plant. With a capacity of 798 cc, it delivers terrific punch right across the rev range. During development, the engineers didn’t seek to achieve as high a revving engine as they could, but to make the motorcycle as easy to control and ride as possible. As a result, fully 90% of the maximum torque of 86 Nm (at 5,800 rpm) is available from 5,000 rpm, while 62.5 kW (85 hp) ensures that all the excitement is transmitted directly to the road.


Good question: why?


Through the long stroke design of the engine, exceptionally smooth torque delivery allows the rider to easily skip gears if desired. The high-performance cylinder head means the engine remains agile and responsive well into the upper rev range during sports-style riding. Rocker arms derived from Formula 1 technology play an important part in this, operating the two-cylinder engine’s eight valves. This reduces friction to a minimum, while boosting rpm stability to its maximum.


The low moving mass and the stiffness of the valve train expose individual components to lower stresses, meaning the BMW F 800 ST offer exceptionally low petrol consumption levels and impressive torque characteristic, while being extremely reliable. Dry sump lubrication ensures optimum oil supply in all riding situations and leads to a re-duction in the overall dimensions of the engine. The oil tank is located in the oil pan, which is sealed completely to the crankcase, meaning a separate oil tank is not necessary. As seen in the 1200 Series, the narrow width of the engine makes it possible to position the water pump to the right side of the cylinder head, reducing the number of short radiator hoses required.


For inexperienced riders, a reduction in engine power can be provided at no extra cost, achieved by way of a reduced throttle valve opening angle, so that the bike then outputs 25 kW (34 hp) at 7,000 rpm and 55 Nm at 3,500 rpm.


Speaking the language of the street. The chassis.

Truly entertaining.


Conventional telescopic forks with a diameter of 43 mm and 140 mm of travel look after front wheel guidance, suspension, damping and anti-dive control. High overlay of the stanchions and fork sliders gives a high level of stiffness and ensures outstanding roadholding, while the steering damper offers maximum stability, even during sports-style riding. The aluminium Delta Box frame used in the F 800 ST is extremely torsion-resistant and is responsible for the motorcycles’ precise, yet exhilarating handling.


A leader amongst bikes.


The engine is the fundamental strength of the F 800 ST. It accommodates an aluminium swinging arm which, in combination with the low-maintenance belt drive, is unique in this segment. The wide design of the eccentric rear wheel mounting ensures that the wheel is always held in the correct position lengthways. Fitting and removing the rear wheel is quick and simple, as is tightening the belt, and the fact that the belt drive and swinging arm complement each other so well leaves you free to concentrate on riding.


Easy access is provided to the handwheel, used to set the spring preload of the directly-linked single suspension strut, while adjusting the strut’s rebound damping is just as easy and can be performed without using any tools, meaning the machine can be quickly adapted to a variety of load conditions.


For those who enjoy taking their machine for longer journeys, the F 800 ST offers an attractive alternative to the F 800 S. It comes with a high windshield and full fairing, for better protection from the wind and rain. With its raised handlebars, the machine’s ergonomics are also much better suited to touring, whilst its large aluminium luggage rack offers extra space for your bags. The appearance of the wheels has also been redesigned to suit the look of the F 800 ST.


Black belt. The drive mechanism.

Because you want to ride. Not wait.


In the new BMW F 800 ST, a low-maintenance toothed belt drive is employed as a final drive, transmit - ting the power of the engine to the rear wheel. The belt has been developed from new, is especially wide and offers a particularly long service life. Once the correct tension has been set during initial inspection, it does not need to be changed until it’s time to replace the belt. Because the toothed belt is constantly tensed, any potential load change reaction is minimized, which is an additional advantage compared to traditional chain drives. At the rear wheel, the toothed belt runs over a stainless steel belt wheel into which is integrated a fourpart, asymmetrical damper, further minimising any load change reaction.


Total control. The brakes.

Pull up. Just to get your breath back.


A front braking system consisting of two 320-mm diameter brake discs plus high-grade, 4-piston hydraulically activated floating brake calipers, equipped with extremely hard-wearing sintered metal coatings, ensures precision control of the BMW F 800 S/ST when stopping. Alongside this, the foot brake is connected to a 265-mm rear brake disc featuring a precise single-piston floating brake caliper that is the last word in reliability. As well as looking great, steel flex brake hoses fitted as standard ensure constantly stable braking pressure, and for an even safer ride, you can choose to opt for the latest version of BMW Motorrad ABS. Weighing a mere 1.5 kg, it features linearly adjustable inlet valves for less brake lever and pedal vibration.


Sit pretty and enjoy the ride.

The ergonomics.


The standard seat on the F 800 ST stands 820 mm off the ground with a step length of 1,810 mm, making the motorcycles ideal for riders over 1.70 m, while a lowered seat of 790 mm and step length of 1,750 mm is also available. All motorcycle riders know that the wider the seat, particularly toward the front, the harder it is to get your feet on the ground – whatever the seat height. As a result, the seat of the F 800 ST has been optimized for step length so that it is markedly slimmer towards the front, giving more freedom of movement for sports-style riding and making it easier to touch the ground when stationary. However, the rear of the seat is broader, for increased comfort. The sitting position on the BMW F 800 ST is suitable for both smaller and larger riders. The ergonomic triangle formed by the footrests, seat and handlebars is designed to give comfortable and relaxing sports-style riding.


-----

SPECS


Engine

Type: Water-cooled, 2-cylinder, 4-stroke, four valves per cylinder, two overhead camshafts, dry sump lubrication

Bore x stroke: 82 mm x 75.6 mm

Capacity: 798 cc

Rated output: 62.5 kW (85 hp) at 8,000 rpm (output reduction to 25 kW (34 hp) at 7,000 rpm possible)

Max. Torque: 86 Nm at 5,800 rpm (with output reduction: 55 Nm at 3,500 rpm)

Compression ratio: 12.0 : 1

Mixture control / engine management: Electronic intake pipe injection / digital engine management (BMS-K)

Emission control: Closed-loop 3-way catalytic converter, emission standard EU-3


Performance / fuel consumption

Maximum speed: Over 200 km/h

Fuel consumption per 100 km at constant 90 km/h:    3.4 l

Fuel consumption per 100 km at constant 120 km/h: 4.4 l

Fuel type: Unleaded super, minimum octane rating 95 (RON)


Electrical system

Alternator: three-phase alternator 400 W

Battery: 12 V / 14 Ah, maintenance-free


Power transmission

Clutch:    Multiple-disc clutch in oil bath, mechanically operated

Gearbox: Constant mesh 6-speed gearbox integrated into crankcase

Drive: Belt drive with shock damper


Chassis / brakes

Frame:    Bridge-type aluminium frame, load-bearing engine

Front wheel location / suspension: Telescopic fork, Ø 43 mm

Rear wheel location / suspension: Cast aluminium single-sided swing arm with eccentric adjustment for rear axle, central spring strut, spring pre-load hydraulically adjustable (continuously variable) at handwheel, rebound damping adjustable

Suspension travel front / rear: 140 mm / 140 mm

Wheelbase: 1,466 mm

Castor: 95 mm

Steering head angle: 64.2°

Wheels: Cast aluminium

Rim, front: 3.50 x 17"

Rim, rear: 5.50 x 17"

Tyres, front: 120/70 ZR 17

Tyres, rear: 180/55 ZR 17

Brake, front: Twin disc, floating brake discs, diameter 320 mm, four-piston fixed calipers

Brake, rear: Single disc, diameter 265 mm, single-piston floating caliper

ABS: Optional extra: BMW Motorrad ABS


Dimensions / weights

Length: 2,082 / 2,195 mm

Width (incl. mirrors): 860 mm

Height (excl. mirrors): 1,155 / 1,225 mm

Seat height, unladen weight: 820 mm (low seat: 790 mm)

Inner leg curve, unladen weight: 1,810 mm (low seat: 1,745 mm)

Unladen weight, road ready, fully fuelled: 204 / 209 kg

Dry weight: 182 / 187 kg

Permitted total weight: 405 kg

Payload (with standard equipment): 201 / 196 kg

Usable tank volume: 16.0 l

Reserve: approx. 4.0 l