The Husqvarna TE 310 R earn its placed among the top dogs in the segment after has dominated the Enduro World Championship E2 class. However, Husqvarna decided to raise the bar even higher and put its engineers to work once more. As a result, the new 2013 Husqvarna TE 310 R comes with a completely reworked engine which offers more torque and power through the whole rev range.

These performances were achieved by using a new cylinder head and Keihin injection. Besides the improved power and torque levels, the changes also affect the ignition lock and the hot-start-lever which are no longer needed.

On the safety side of things the 2013 Husqvarna TE 310 R receives standard handlebar protection, stiffer radiators and a magnet in the crankcase oil plug. You also get softer handgrips for the handlebar.

Hit the jump for more information on the 2013 Husqvarna TE 310 R.

2013 Husqvarna TE 310 R

Specifications
  • Make: Array
  • Model: 2013 Husqvarna TE 310 R
  • Engine/Motor: 4-stroke single cylinder, four vales, two overhead camshafts, wet sump lubrication
  • Transmission: Constant mesh 6-speed
  • [do not use] Vehicle Model: Array

Overview

n the 2011 season of the Enduro World Championship E2 class, Antoine Meo dominated the comptetitors with his TE 310. This year's season the Fin Juha Salminen continues this heritage. The TE 310R combines the easy handling of a 250 4-stroke Enduro bike with additional power and torque thanks to additional displacement. On the race tracks of the world the TE 310 has proved that it can easily compete with bikes of bigger displacements. This year the engineers of Husqvarna have reworked the engine completly with the result to have more torque and power through the whole rev range.

New Cylinder head for more power and torque

This year also the TE 310R received the readhead and the Keihin injection. These changes give the bike more power and torque through the whole rev range. Also thanks to these changes and ingition lock and the hot-start-lever are no longer needed.

Improvements all over the bike

The handlebarprotection which is serial euqipment of this bike increases the safety of the riding. But also the stiffer radiators and the magnet in the crankcase oil plug gurantee more reliablity. The lightest bike in its class is now euqippet with softer handgrips which are glued on the handlebar.

Specifications

Engine Type

4-stroke single cylinder, four vales, two overhead camshafts, wet sump lubrication

Bore / Stroke

82 mm x 57.35 mm

Displacement

302.44 cc

Compression Ratio

13.1:1

Mixture Control / Engine Management

Electronic injection / digital engine management, capacitive discharge ignition, with variable advance

Starting

Electric and kick start

Cooling

Liquid cooling

Clutch

Wet, multiplate type, hydraulic control

Gearbox

Constant mesh 6-speed

Final Drive Ratio

13T / 40T (3.076)

Frame

Steel single tube. Aluminium rear subframe

Front Suspension

Kayaba upside-down telescopic open cartridge fork; compression and rebound damping adjustment; ø 48 mm

Rear Suspension

Kayaba progressive "Soft Damp" type wiht single hydraulic shock absorber; spring preload adjustment, rebound damping adjustment, and compression damping adjustment for low-speed and high-speed

Front Suspension Travel

300 mm

Rear Suspension Travel

296 mm

Wheels

Aluminium alloy spoked wheels

Rim, Front

1.60"x21"

Rim, Rear

2.15"x18"

Tyres, Front

90/90 - 21"

Tyres, Rear

120/90 - 18"

Brake, Front

260 mm fixed disc, "Wave" type, with hydraulic control and double piston floating caliper

Brake, Rear

240 mm fixed disc, "Wave" type, with hydraulic control and single floating caliper

Wheelbase

1,470 mm

Seat Height, unladen weight

950 mm

Ground Clearance, unladen weight

290 mm

Trail

106 mm

Rake

26.5°

Dry Weight

109 kg

Fuel Tank Capacity

8.5 l


|