With its unstoppable character the Kawasaki KX 250 is ready to deal with any type of terrain with poise. The bike is propelled by a fuel injected, liquid cooled, 4 stroke, 249 cc engine which sends power to the rear wheel through a five speed gear box. The sound of the new 30mm shorter muffler is pretty impressive because it was designed with a 7mm wider outlet than the previous one. On the other hand, the stainless header now uses an acoustic resonator to decrease sound output and boost low-end power. The 2013 Kawasaki KX 250F is now offered with DFI map selector couplers to make the power change much faster than before.

As far as style goes, the bike comes with Factory-style graphics, black alumite rims, black front guard and rear fender, blue alumite finish on the suspension adjusters, and a blue finish on some of the engine.

Hit the jump for more information on the 2013 Kawasaki KX 250F.

2013 Kawasaki KX 250F

Specifications
  • Make: Array
  • Model: 2013 Kawasaki KX 250F
  • Engine/Motor: Liquid-cooled, 4-stroke Single
  • Transmission: 5-speed, return
  • [do not use] Vehicle Model: Array

Kawasaki KX 250F

Lead - Don’t follow. Even slimmer for ultimate control, the Championship winning, dual injector equipped KX250F is more trackside tuneable, powerful and rider-compliant than ever.

Separate function fork (SFF) Type 2

The KX250F is the only mass-production motocrosser featuring Showa's Separate function fork (SFF) type 2. Thicker fork tubes and new internal construction offer increased damping performance and stability when on the breakes or landing jumps.

Factory Styling

Factory-style graphics, black alumite rims, black front guard and rear fender, blue alumite finish on the suspension adjusters, and a blue finish on some of the engine trim give the KX250F the looks to match high tuned performance.

Race-ready front suspension

A super-hard titanium coating on the outer surface of the inner forktubes combined with Kashima coat on the inside of the outer tubes reduces sliding friction and improves action, for a better ride feel.

Race-oriented brake system

Front and rear petal discs are complemented by a new front brake master cylinder and front brake pads, for stronger braking performance and control.

New uni-trak rear suspension

Linkage mounts below the swingarm for more precise suspension tuning. dual compression adjustability offers a wide range of tuning options. Kashima coat on the tank cylinder improves action. revised dumping settings match the new front fork and revised chassis balance.

Easy engine tuning: DFI setting data selection

Adjusting engine settings to suit conditions has never been easier than with the new DFI couplers. The new ECU features three engine maps (soft, standard and hard). riders can easily switch between them to suit riding conditions just by plugging in each of the 4-pin coupler.

KX FI Calibration Kit (option)

The KX FI Calibration Kit is the same kit used by Kawasaki’s works teams in Europe and the U.S. The kit enables expert riders to adjust engine characteristics (by rewriting actual data maps) to suit their preference, record riding data, and analyse their riding data to further fine-tune their settings.

High-speed chassis with factory-style components

Aluminium perimeterframe is a lightweight construction composed of forged, extruded and cast parts. Revised rigidity contributes to lighter handling and improved rear wheel traction, while a slimmer design contributes to improved ergonomics.

Even more powerful, high-revving dual-injection engine with factory-style tuning

Highly acclaimed for its high output and power delivery. The world’s first dual injection for motocrossers, offers a straighter intake tract, even more high-rpm power,and choice of three easy-to-use engine map settings.

Slim rider Interface

Slimmer new frame, new minimalist bodywork, a flatter tank-seat line and new handle grips offer a slimmer riding position and improved ergonomics, making it even easier for riders to go fast.

High-Performance piston

High-performance piston, featuring the same design used on our factory racers, contributes to improved performance at all rpm. A short skirt, reinforced external ribs and the industry’s only mass-production use of a bridged-box bottom, featuring fully flush internal bracing, result in a lighter, stronger piston.

Next-level power

Adding to the highly acclaimed power offered by the KX250F's dual injectors - a world first for motocrossers - more direct intake routing and wider porting further increases high-rpm performance.

The 43 mm throttle body makes use of a progressive throttle link to deliver airflow in much the same way as would a FCR carburetor. Using two linked shafts, the throttle body opens more quickly after the 3/8 open position, delivering sharp response and excellent power feeling.

Specifications

Fuel system

Fuel injection: ø43 mm x 1 (Keihin) with dual injection

Ignition Digital

DC-CDI

Starting

Primary kick

Lubrication

Forced lubrication, semi-dry sump

Engine type

Liquid-cooled, 4-stroke Single

Displacement

249 cm³

Bore x stroke

77.0 x 53.6 mm

Compression ratio

13.8:1

Valve/Induction system

DOHC, 4 valves

Clutch

Wet multi-disc, manual

Primary reduction ratio

3.350 (67/20)

Gear ratios: 1st

2.142 (30/14)

Gear ratios: 2nd

1.750 (28/16)

Gear ratios: 3rd

1.444 (26/18)

Gear ratios: 4th

1.235 (21/17)

Gear ratios: 5th

1.045 (23/22)

Final reduction ratio

3.846 (50/13)

Transmission

5-speed, return

Final Drive

Chain

Frame type

Perimeter, aluminium

Rake/Trail

28.7° / 126.4 mm

Wheel travel, front

315 mm

Wheel travel, rear

310 mm

Tyre, front

80/100-21 51M

Tyre, rear

100/90-19 57M

Steering angle, left / right

42° / 42°

Suspension, front

Type: 48 mm upside-down telescopic Separate Function front Fork (SFF) Type 2 Compression damping: 22-way Rebound damping: 20-way Spring preload: 40-way

Suspension, rear

Type: New Uni-Trak Compression damping: 19-way

(low-speed), 4-turns (high-speed) Rebound damping: 22-way Spring preload: Fully adjustable

Brakes, front

Type: Single semi-floating 250 mm petal disc Caliper: Dual-piston

Brakes, rear

Type: Single 240 mm petal disc Caliper: Single-piston

Dimensions (L x W x H)

2,170 mm x 820 mm x 1,270 mm

Ground Clearance

330 mm

Wheelbase

1,475 mm

Seat height

945 mm

Fuel capacity

6.1 litres

Curb Mass

106.2 kg


Quotes

Motorcycle-Usa ---- "MotoUSA made the trip to Minnesota and laid ruts in the sandy loam for two full days of riding on Kawasaki’s latest bid for 250F moto dominance"

Motocross ---- "It’s that time of year again and the new 2013 bikes are arriving very soon! I got the invite from Kawasaki to come out to Millville, Mn. and ride the All-New 2013 KX 250F. "

Dirtrider ---- "The plastic is all-new, including the front number plate and front fender. The two-piece radiator shrouds are gone and back are one piece. All the plastic, minus the shrouds, is the same as KX450F."

Ultimatemotorcycling ---- "Kawasaki recently invited a few dirt-savvy journalists to be the first to test ride the 2013 KX250F, a machine that was totally revamped for 2012."