The 2013 KTM 200 XC-W is packed with a comprehensive list of modern features that help it deliver first class performances in terms of power, handling and stability.

At its heart lies a 193 cc, 1 cylinder 2 stroke engine, water-cooled engine with reed intake and exhaust control which is kept in check by a six speed transmission with multidisc clutch. The engine comes with an electric starter, new cylinder head and new carburetor jets, so you can expect to a sharp power delivery and great handling.

It is also worthy of being mentioned that the motorcycle rides on a set of sporty suspension that include a front WP Suspension up side down fork and a rear WP Suspension shock absorber.

As far as prices are concerned the 2013 KTM 200 XC-W can be yours for no less than $7,499.

Hit the jump for more information on the 2013 KTM 200 XC-W.

2013 KTM 200 XC-W

Specifications
  • Make: Array
  • Model: 2013 KTM 200 XC-W
  • Engine/Motor: 1-cylinder 2-stroke engine, water-cooled, with reed intake and exhaust control
  • Transmission: 6-speed
  • [do not use] Vehicle Model: Array

Overview

Perfect union: the playful handling of a 125 coupled with engine power that comes close to that of a 250. The KTM 200 XC-W redefines user-friendliness in 2013: electric starter, new cylinder head and new carburetor jets! As a result, it's the first choice for all those seeking the best handling, comfort and power for entry level enduro racing.

Airbox

The airbox on the ktm 200 xc-w model year 2013 allows maximum air to pass through, but minimal dust and spray. Replacement of the twin-air filter takes approx. 15 seconds, without any tools. Absolutely "ready to race".

New cylinder head

Ktm 2-stroke technology is updated and refined year after year. The newly developed cylinder head delivers smooth and more even responsiveness in my 2013. At the same time, new jets tuned to the modified cylinder head ensure even better rideability. Power-valve exhaust control, 6-speed transmission and electric-starter are a tried and tested ktm standard for 250/300 cm³ (250/300 cu in). From my 2013, for the ktm 200 xc-w as well!

Additional electric starter

The 200 xc-w is equipped with both kick and electric-starters in my 2013. This simplifies starting the bike in all situations. With its patented placement in a longitudinal direction above the ignition, the compact starter system is optimally protected and provides a decisive advantage in hard offroad use.

Individual suspension setting

The ktm 200 xc-w has its own individual suspension setting in my 2013, optimally tuned to weight and engine.

Brakes

Sensitive: brakes from brembo® are standard equipment on the ktm offroaders and, together with steel-braided brake lines and lightweight wave-type brake discs, they are recognized as the measure of all things in terms of application and brake performance. The further refined rear brake cylinder has a new internal mechanism. This leads to less wear at the rubber seal and results in a longer service life in tough offroad use.

Frame

The high-quality, chrome-molybdenum steel frame excels with even greater lateral stiffness. It is also better at absorbing jolts introduced by the suspension system, thereby, boosting the bike's playful handling and comfort.

Optimized swingarm

The ktm 200 xc-w's lightweight, cast aluminum swingarm accommodates the shock absorber centrally in order to load the arms evenly. The pds shock absorber, featuring adjustable rebound and high/low-speed compression damping and new settings, is installed more flatly to provide better progression.

Telescopic fork, new setting

The latest generation of fully adjustable 48 mm (1.89 in) open-cartridge fork "made in austria" by wp suspension provides the highest level of responsiveness with more constant damping characteristics. Not least due to the use of a new fork oil and new skf fork seal rings.

Bodywork

The ktm 200 xc-w has bodywork with extremely slim ergonomics and excellent contact points between rider and machine. It provides unlimited freedom of movement. Newly styled graphics give the models a fresher appearance in 2013.

Specifications

Engine Type

1-cylinder 2-stroke engine, water-cooled, with reed intake and exhaust control

Displacement

193 cm³ (11.78 cu in)

Bore

64 mm (2.52 in)

Stroke

60 mm (2.36 in)

Starting aid

Kick starter and electric starter

Gearbox

6-gear, claw shifted

Primary transmission

23:73

Secondary ratio

14:48

Clutch

Multidisc clutch in oil bath/hydraulically activated

Ignition

Contactless controlled fully electronic ignition with digital ignition adjustment, type Kokusan

Frame

Central tube frame made of chrome molybdenum steel tubing

Fork

WP Suspension Up Side Down 4860 MXMA PA

Shock absorber

WP Suspension PDS 5018 DCC

Suspension travel Front

300 mm (11.81 in)

Suspension travel Rear

335 mm (13.19 in)

Brake system

Disc brakes, brake calipers on floating bearings

Brake discs - diameter Front

260 mm (10.24 in)

Brake discs - diameter Rear

220 mm (8.66 in)

Chain

5/8 x 1/4"

Steering head angle

63.5°

Wheelbase

1,471±10 mm (57.91±0.39 in)

Ground clearance unloaded

355 mm (13.98 in)

Seat height unloaded

960 mm (37.8 in)

Total fuel tank capacity, approx.

10 l (2.6 US gal)

Weight without fuel, approx.

95 kg (209 lb.)

Price

$7,499