The MV Agusta F4 R was designed from the ground up to deliver sporty performances. The key feature of the F4 R is the new “Corsa Corta” engine which is also offered for the F4 RR super bike. The engine delivers a maximum output of 195.2 hp at 13000 rpm and features a series of upgrades which improve its power delivery and the overall performance. For the starters the cylinder head uses completely new ports and employs larger valves both on the inlet and exhaust, while the valves are made of titanium. The bike also uses a new 4-2-1-4 primary section for the exhaust system which helps the engine breathe easier.

The engine is mounted on a steel tubular trellis frame with the steering head angled at 23.5°, to offer perfect control, maneuverability, and stability. The frame is combined with a lightweight rear single-sided swingarm that weighs only 5 kg.

Hit the jump for more information on the 2012 MV Agusta F4 R Corsa Corta.

2012 MV Agusta F4 R Corsa Corta

Specifications
  • Make: Array
  • Model: 2012 MV Agusta F4 R Corsa Corta
  • Engine/Motor: FOUR CYLINDER, 4 STROKE, 16 VALVE
  • Horsepower: 192 @ 13000
  • Torque: 112 @ 9100
  • Transmission: 6-Speeds Transmission
  • [do not use] Vehicle Model: Array

Press Release

THE MV AGUSTA F4 R CORSA CORTA HAS ARRIVED

The new MV Agusta F4 R 2012 has been designed to offer clients a superbike with extreme performance. The key feature of the F4 R is, in fact, the new “Corsa Corta” engine capable of extraordinary performance and already employed on the F4 RR, the top of the MV Agusta superbike range.

The new 4 cylinder inline with radial valves is the pulsing heart of the MV Agusta F4 R. The thermodynamics have been completely redesigned, starting from the new low inertia crankshaft which makes it possible to use a super over-square bore and stroke ratio. In this way, the MV F4 R is capable of reaching rpm worthy of a pure racing motorcycle. The engine capacity of 998cc has been obtained by using a bore of 79 mm and a stroke of only 50.9 mm. In this way it is possible to achieve an extremely high 13700 rpm rev limit while at the same time lowering the linear velocity of the piston from 24.9 m/s to 23 m/s improving reliability.

In order to reach the stratospheric homologated power of 195.2 hp (against the 201 hp of the super powerful RR version) at 13000 rpm, every component was thoroughly engineered. The cylinder head uses completely new ports and employs larger valves both on the inlet and exhaust. For the first time on a mass production motorcycle, all the valves are made of titanium, allowing the weight of these to be reduced regardless of the increase in diameter (from 28.6 to 31.8 mm for exhaust and from 24.6 to 26 mm for the exhaust). The engine “breathes” in a more efficient way thanks to the use of a new 4-2-1-4 primary section of the exhaust system. In addition to assuring optimized engine efficiency, this new exhaust system offers an absolutely unique sound that is even more captivating then in previous versions. The fuel system employs 4 throttle bodies with a 49mm diameter and double fuel injectors per cylinder coupled with the unique MV Agusta TSS (Torque Shift System) variable intake runners.

The new engine of the MV Agusta F4 R was designed with the scope of reducing the internal friction to a minimum: the transmission’s new primary gear ratio allowed a drastic reduction in rpm of both generator and water pump, thereby limiting the absorbed power. This extraordinary engine utilizes the unique features that have become trademarks to MV Agusta including a removable 6-speed gearbox and a slipper clutch which assures precise control even during the most violent braking manoeuvres. The electronic management system has been continuously evolved, the traction control employs a new algorithm and maintains the two rider selectable engine maps, all of which are now comfortably adjustable by means of the new control situated on the left handlebar.

The new MV Agusta F4 R remains, naturally, faithful to the structural tradition of mixing a steel tubular trellis to cast aluminium side-plates. The steering head angle is set at 23.5°, perfect for providing control, manoeuvrability, and stability. Also confirmed is the exceptional rear single-sided swingarm, a real engineering jewel that weighs only 5 kg, a record for this type of element.

The MV F4 R retains its notoriety for excellence in the area of suspension. The Marzocchi upside down forks, with 50 mm stanchions, is derived directly from the units used in competition, they are adjustable in spring preload as well as the hydraulic extension and compression. The forged ultra-light front axle carrier is also especially made for the F4 R and uses a rapid release system for the wheel, reminiscent of the first F4, the legendary Serie Oro that adopted this same technical solution. The rear Sachs shock absorber is equipped with a nitrogen reservoir (separated and integrated within the body) and is adjustable in extension, compression and spring preload. The shock linkage allows the ride height to be adjusted depending on the desired setup, rider preferences to further tune the bike to specific riding conditions and tracks.

The Brembo front brake system, with “monoblock” radial calipers is, without a doubt, the best system for motorcycles currently on the market, coupled to a master cylinder with integrated reservoir made specifically to demanding MV specifications.

The 320 mm diameter floating double front discs use an ultra light flange which are 5 mm thick to reduce inertia forces and non suspended masses. The rear brake system is made exclusively for MV with a stainless steel 220 mm diameter disc and 4 piston calliper.

The new F4 R, already on sale at official dealers, is available in 2 colours: red/grey and white/medium grey, at a price of £14,499.

SPECIFICATIONS

ENGINE TYPE

FOUR CYLINDER, 4 STROKE, 16 VALVE

TIMING SYSTEM

D.O.H.C, RADIAL VALUE

TOTAL DISPLACEMENT

998 CC (60.9 CU. IN)

COMPRESSION RATIO

13.4:1

STARTING

ELECTRIC

BORE X STROKE

79.0mm x 50.9mm (3.1 IN. X 2.0 IN.)

MAX HORSEPOWER

143.5 KW (195 HP) AT 13000 R.P.M - REV LIMITER 13700 R.P.M

MAX TORQUE

112 NM (11.4 KGM) AT 9100 R.P.M

COOLING SYSTEM

COOLING WITH SEPARATED LIQUID AND OIL RADIATORS

ENGINE MANAGEMENT SYSTEM


-MAGNETI MARELLI IAW 7BM IGNITION

-INJECTION INTERGRATED SYSTEM WITH MIKUNI THROTTLE BODY

-INDUCTION DISCHARGE ELECTRONIC IGNITION

-SEQUENTIAL TIMED MULTIPOINT ELECTRONIC INJECTION, VARIABLE HEIGHT INTAKE DUCTS WITH TORQUE SHIFT -SYSTEM (TSS)


CLUTCH

WET, MULTI - DISC WITH MECHANICAL ANTI-SURGING DEVICE AND BREMBO RADIAL MASTER CYLINDER

GEAR BOX

CASSETTE GEARBOX, SIX SPEED, CONSTANT MESH

PRIMARY DRIVE

48/82

GEAR RATIO


-14/37 134.1 KM/H (83.3 MPH) A T 13700 RPM

-16/33 171.8 KM/H (106.7 MPH) AT 13700 RPM

-18/31 205.8 KM/H (127.9 MPH) AT 13700 RPM

-20/30 236.3 KM/H (146.8 MPH) AT 13700 RPM

-22/29 268.9 KM/H (167.1 MPH) AT 13700 RPM

-21/25 297.6 KM/H (184.9 MPH) AT 13700 RPM


FINAL VELOCITY RATIO

15 X 41

VOLTAGE

12 V

ALTERNATOR

350 W AT 5000 R.P.M

BATTERY

12 V - 8.6 AH

WHEELBASE

1430 MM (56.27 IN.)

OVERALL LENGHT

2100 MM (82.63 IN.)

OVERALL WIDTH

750 MM (29.51 IN.)

SADDLE HEIGHT

830 MM (32.68 IN.)

MIN. GROUND CLEARANCE

115 MM (4.52 IN.)

TRAIL

100.4 MM (3.93 IN.)

DRY WEIGHT

192 KG (423 LBS)

FUEL TANK CAPACITY

17 L (4.49 GAL.)

MAXIMUM SPEED

297.6 KM/H (184.9 MPH)

FRAME TYPE

CRMO STEEL TUBULAR TRELLIS (TIG WELDED)

REAR SWING ARM PIVOT PLATES MATERIAL

ALUMINIUM ALLOY - ADJUSTABLE SWINGARM PIVOT HEIGHT

FRONT SUSPENSION TYPE

UPSIDE - DOWN TELESCOPIC HYDRAULIC FORK WITH REBOUND-COMPRESSION DAMPING AND SPRING PRELOAD EXTERNAL AND SEPARATE ADJUSTMENT

ROD DIA

50 MM (1.97 IN.)

TRAVEL ON LEG AXIS

120 MM (4.72 IN.)

REAR SUSPENSION TYPE

PROGRESSIVE, SINGLE SHOCK ABSORBER WITH REBOUND DAMPING AND SPRING PRELOAD ADJUSTMENT

SINGLE SIDED SWING ARM: MATERIAL

ALUMINIUM ALLOY

WHEEL TRAVEL

120 MM (4.72 IN.)

FRONT BRAKE

DOUBLE FLOATING DISC WITH Ø 320 MM (Ø 12.6 IN.) DIAMETER, WITH STEEL BRAKING BAND AND ALUMINIUM FLANGE - BREMBO RADIAL MASTER CYLINDER

FRONT BRAKE CALIPER

RADIAL WITH 4 PISTONS - Ø 34 MM (Ø 1.34 IN.)

REAR BRAKE

SINGLE STEEL DISC WITH Ø 210 MM (Ø 8.27 IN.) DIAMETER

REAR BRAKE CALIPER

RADIAL WITH 4 PISTONS - Ø 34 MM (Ø 1.34 IN.)

RIM FRONT

MATERIAL/SIZE ALUMINIUM ALLOY 3.50" X 17"

RIM REAR

MATERIAL/SIZE ALUMINIUM ALLOY 6.00" X 17"

FRONT

120/70 - ZR 17 M/C (58 W)

REAR

190/55 - ZR 17 M/C (75 W)

FAIRING MATERIAL

THERMOPLASTIC


QUOTES

Cycleworld ---- "MV Agusta continues to reorganize its line of F4-based sportbikes while working hard on final validation of the new three-cylinder F3 family."

Bikez ---- "The new MV Agusta F4 R 2012 has been designed to offer clients a superbike with extreme performance. The key feature of the F4 R is, in fact, the new “Corsa Corta” engine capable of extraordinary performance and already employed on the F4 RR, the top of the MV Agusta superbike range."

Ashonbikes ---- "MV Agusta has introduced a lower spec version of its flagship F4 RR superbike fitted with the same ‘Corsa Corta’ (short stroke) engine."