> 

2014 MV Agusta Brutale 800 Dragster

Posted on by  

MV Agusta has fully revealed its all-new Brutale 800 Dragster which comes with a base price of €13.490 (VAT included).

The new motorcycle is one of the sportiest nakeds designed by the Italian manufacturer and features an aggressive design language and a comprehensive list of state of the art technologies. Its seat can accommodate only one person and the entire bike weighs only 167 kg (dry).

At the heart o this mechanical beast lies a 798 cc, three cylinder, 4 stroke, 12 valve, D.O.H.C engine with a total displacement of 798 cm3 (48.68 cu. in.). The unit is paired with a six speed constant mesh transmission and delivers a maximum output of 92 kW (125 hp) at 11600 rpm and 81 Nm (8.25 kgm) of torque at 8600 rpm.

The MV Agusta Dragster rides on a pair of sporty Pirelli DIABLO Rosso tyres that measure II 120/70 - ZR 17 up front and 200/50 – ZR 17 at the rear.

Hit the jump for more information on the MV Agusta Brutale 800 Dragster.

Overview

MV Agusta Brutale 800 Dragster

2014 MV Agusta Brutale 800 Dragster

Throttle wide open. Engine at the rev limit. The rear wheel spinning relentlessly trying to gain traction, surrounded by a cloud of white smoke, defenning tyre squeal, raw power, biting into the tarmac and devouring it metre after metre. The mv agusta brutale 800 dragster is all this and much, much more. It is motorcycling reduced to the essence of pure riding pleasure. Emotional, freedom.

2014 MV Agusta Brutale 800 Dragster Key Features:

MV Agusta Brutale 800 Dragster

• In-line three-cylinder engine, 798 cc
• Bore 79.0 mm, stroke 54.3 mm
• Maximum power 125 HP-EC (92 kW) at 11,600 rpm
• Maximum torque 81 Nm at 8,600 rpm
• Limiter at 13,000 rpm
• Dry weight 167 kg
• Power-weight ratio 1.34 kg/HP
• Tyres Pirelli DIABLO Rosso II 120/70 - ZR 17 front, 200/50 – ZR 17 rear

2014 MV Agusta Brutale 800 Dragster Features and Benefits:

MV Agusta Brutale 800 Dragster

Engine

MV Agusta Brutale 800 Dragster

Engineering at the service of manufacturing efficiency: the 3-cylinder MV Agusta platform demonstrates how conscientiousness at the concept and design stages can result in the development of completely original models from the same, shared technological basis. The new Brutale 800 Dragster is no exception to that rule, once again highlighting the versatility of the cutting-edge MV Agusta platform centred on the 3-cylinder engine - the power unit that has made the greatest developmental progress in its market segment. The goals laid out in the project brief were highly ambitious: performance at the peak of their respective displacement categories (675 and 800), maximum elasticity, low fuel consumption and a torque curve spread evenly across the entire power range. And unprecedented compactness: the three-cylinder MV Agusta engine, built to achieve all these goals, weighs just 52 kg, giving improved output flexibility and better load distribution on the axles, on both the new Brutale 800 Dragster and the other models that already possess this feisty in-line 3-cylinder Italian engine. Key technical features include the shell-cast “closed-deck” crankcase with integral bore liners; the need for compactness has also imposed full integration of the water and oil circuits and the respective service pumps. Just as significant - and exclusive - is the choice of counter-rotating crankshaft, a solution with origins in the racing world where ride responsiveness has absolute priority, and the only judge of performance is the stopwatch. The counter-rotating crankshaft reduces inertia during changes of direction because it lowers that same inertia during deceleration; this enhances handling, the excellence of which is already a built-in top-priority feature of the MV Agusta chassis set-up. Compared to previous 3-cylinder configurations, the one specially developed for the Brutale 800 Dragster focuses on fast-response, linear power output, putting a mighty roar into this roadster. The 125 HP power peak is reached at 11,600 rpm, while the maximum torque of 81 Nm comes at 8,600 rpm. Completing this highly sophisticated package is the removable 6-speed gearbox, with ratios designed to ensure awesome acceleration and a sports-category top speed should the bike be unleashed on the track.

Electronics

MV Agusta Brutale 800 Dragster

The new MVICS (Motor&Vehicle Integrated Control) injection-ignition system features the very latest software and an engine control strategy first implemented, with great success, on the Rivale 800 and now extended to the entire 3-cylinder MY2014 range. MVICS also features the Eldor EM2.0 engine control unit and a Mikuni Full Ride-By-Wire throttle body. The fully integrated management allows, via the instruments and the handlebar switches, easy adjustment of numerous user-settable parameters. More specifically, the system lets the rider configure the torque setting with 4 different mappings. Three of these are set directly by the manufacturer and named according to the relative riding conditions (Sport, Normal and Rain) while the fourth leaves the rider free to define, within established limits, all the individual parameters: engine response, rev limiter, engine torque response, throttle sensitivity, engine braking. As one would expect, 8-level traction control (which can be disengaged) is also included: the relative algorithms have been tweaked to perfection for maximum precision, a must on a bike such as the new Brutale 800 Dragster as one of its defining characteristics is astounding acceleration.

Chassis Set-up

MV Agusta Brutale 800 Dragster

The frame configuration, which has characterised the 3-cylinder platform since its inception, features an ALS tubular steel load-bearing structure, supplemented by lightweight aluminium alloy plates. This combination forms part of that production flexibility concept which inspired the 3-cylinder project and consequently allows the design of specially-developed frames for each model without disrupting the underlying look or essence. Note that this same set-up has characterised MV Agusta models since the launch of the astonishing F4: today’s 3-cylinder Italian-built MV Agusta bikes offer up an even more highly evolved version of the concept. The front, tubular section employs a steel alloy with exceptional metallurgical qualities that, while extremely lightweight, provides outstanding torsional stiffness, especially in those areas most subject to stress, such as the steering head. The aluminium alloy plates close off the structure at the rear and act as the fulcrum for the single-sided swingarm. A compact wheelbase of just 1,380 mm, identical to that of the Brutale 800, strikes a perfect balance, ensuring both excellent handling and stability; the 95 mm trail boosts the already outstanding front end performance, making for enhanced ridability and bike control. Another eye-catching feature perfectly in keeping with the Brutale 800 Dragster design ethos is the attentiongrabbing Pirelli DIABLO Rosso II rear tyre, having a width of 200 and a shoulder of 50. The suspension system features fully adjustable units, allowing personalisation of compression and rebound settings, as well as providing a selection of spring pre-load options. The Ø 43 mm upside-down Marzocchi fork offers 125 mm of travel; the Sachs rear shock gives the single-sided swingarm - also in aluminium alloy - 125 mm of travel. The seat, with a height of 811 mm, has been redesigned to improve comfort and function: it also boasts a craftsman-like finish with stylishly stitched seams. The rider can also count on even more functional foot pegs and supports, and new heel guards which, just like the wheel rims, have been specially customised for the Dragster. Equipped with first class Brembo components, the braking system relies on a pair of Ø 320 mm floating front discs, equipped with 4-piston callipers (Ø 32 mm); the rear unit, instead, has a Ø 220 mm steel disc and mounts a 2-piston calliper (Ø 34 mm).

Specifications

MV Agusta Brutale 800 Dragster
Engine TypeThree cylinder, 4 stroke, 12 valve Timing system “D.O.H.C”
Total displacement798 cm3 (48.68 cu. in.)
Compression ratio13.3:1
StartingElectric
Bore x stroke79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - r.p.m.(at the crankshaft)**92 kW (125 hp) at 11600 r.p.m.
Max. torque - r.p.m.81 Nm (8.25 kgm) at 8600 r.p.m.
Cooling systemCooling with separeted liquid and oil radiators
Engine management systemIntegrated ignition - injection system MVICS (Motor & Vehicle Integrated Control System) with three injectors Engine control unit Eldor EM2.0, throttle body full drive by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire Torque control with four maps, Traction Control with eight levels of intervention
Electronic quick-shiftMV EAS (Electronically Assisted Shift)
ClutchWet, multi-disc with mechanical drive
TransmissionCassette style; six speed, constant mesh
Primary drive19/36
Gear ratioFirst gear: 13/37
Second gear: 16/34
Third gear: 18/32
Fourth gear: 19/30
Fifth gear: 21/30
Sixth gear: 22/29
Final drive ratio 16/41
Voltage12 V
Alternator350 W at 5000 r.p.m.
Battery12 V - 8.6 Ah
Wheelbase1380 mm (54.30 in.)
Overall length2060 mm (81.06 in.)
Overall width825 mm (32.46 in.)
Saddle height811 mm (31.91 in.)
Min. ground clearance149 mm (5.86 in.)
Trail95 mm (3.74 in.)
Dry weight167 kg (368.2 lbs.)
Fuel tank capacity16.6 l (4.39 U.S. gal.)
Maximum speed*245.0 km/h (153.1 mph)
Frame TypeALS Steel tubular trellis
Rear swing arm pivot plates materialAluminium alloy
Front Suspension TypeMarzocchi “UPSIDE DOWN” telescopic hydraulic fork with rebound-compression damping and spring preload external and separate adjustment
Fork dia.43 mm (1.69 in.)
Fork travel125 mm (4.92 in.)
Rear Suspension TypeProgressive Sachs, single shock absorber with rebound and compression damping and spring preload adjustment
Single sided swing arm materialAluminium alloy
Wheel travel125 mm (4.92 in.)
Front brakeDouble floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliperBrembo radial-type, with 4 pistons Ø 32 mm(Ø 1.26 in.)
Rear brakeSingle steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliperBrembo with 2 pistons - Ø 34 mm (Ø 1.34 in.)
ABS SystemBosch 9 Plus with RLM (Rear wheel Lift-up Mitigation)
Front Wheel Material/sizeAluminium alloy 3.50 ” x 17 ”
Rear Wheel Material/sizeAluminium alloy 6.00 ” x 17 ”
Front Tire120/70 - ZR 17 M/C (58 W)
Rear Tire200/50 - ZR 17 M/C (75 W)
Fairing MaterialThermoplastic
Color OptionsWhite, Matt Metallic Grey
Price VAT included€13.490

* Top speed attained on closed course.
** Limited power versions available on demand. Every country could have a price variation due to local import duties and taxes.


More From TopSpeed

What is your take?

Back to top