6X4

6X4

Posted on by Serafim 0

Tired of your old Kenworth truck? No reason to worry, as Kenworth has made available a series of glider kits for the T660, T800 and W900L models. The glider kits can be mated to customer-supplied EPA 2004 engines and matching transmissions.

Alan Fennimore, vocational marketing manager declared, “We’re offering the gliders as both rolling and non-rolling models (customer supplies driveline, axles, suspensions, wheels, tires and other ‘rolling’ equipment) and no FET tax is included from Kenworth. Depending upon the project’s final cost, and if the host parts came from a useable truck, the 12% Federal Excise Tax (FET) on new trucks may not be applicable, which can be a real money saver for customers.”

FET will apply when a glider kit is used to repair a wrecked truck vehicle, or change its intended service or where the restoration cost exceeds 75% of the value.

Mr. Fennimore added: “There are several other engine-related components – such as electrical harnesses, power steering pumps, batteries and air cleaners – that customers need to supply themselves, or purchase from Paccar Parts through their local Kenworth dealerships, but for the truck itself, it’s a very complete package.”

Concluding the report, Fennimore said that the interest for gliders has started to grow in the latest years, hence their decision, “Gliders are a great alternative for fleets and owner operators with the tools and service technicians to bring a solid and existing powertrain back to life in a ‘brand new truck’. We’ve talked with several fleets that plan to purchase gliders and have their service technicians work on the conversions during slow or off periods. It can be an effective use of shop hours.”

Posted on by Serafim 0

General Motors has started to sell its T-Series trucks in 1998. The vehicles were based on the Isuzu’s F-Series medium duty range of trucks and shared the same design and technologies with their siblings.

The Chevrolet T-Series range consisted of three models namely the T6500, T7500 and T8500, all powered by a 7.8 liter Isuzu diesel engine. All Chevrolet T-Series trucks had a cab over engine configurations and were equipped with various Allison transmissions.

The Chevrolet T Series was sold until 2009 and came with GVM (gross vehicle mass) ratings between 24,350 lbs. to 39,000 lbs. and 4x4, 6x2 and 6x4 axle configurations.

Posted on by Serafim 0

Mack’s models are among the best truck’s you’ll find on today’s market and the company was always a leader when it comes to comfort and new technologies.

The company has recently made available a new series of features for the Pinnacle model, designed to increase the driver’s comfort.

Jerry Warmkessel, Mack highway marketing manager declared, “Driver retention is critical, and one way to positively impact that is to improve driver comfort. A comfortable driver is also a more productive, safer driver. We listened to what our customers told us they wanted in their cabs, and we’re delivering it with this series of interior enhancements that result in a more comfortable, productive cab environment.”

Mack’s new features include an optional center storage console with interior lightening and a 12 volt power slot. There is also a new optional ambient floor lightning and a standard rest pedal for the driver’s left foot.

The Pinnacle’s cab will be fitted from now on with a new standard dash-mounted single DIN Mack mDrive automated manual transmission shifter.

Mack has come also up with a series of improvements to the PowerLash and Engine brake controls to improve the driving performances.

Other new features include self-cancelling turn signals and a remote in-dash sleeper auxiliary HVAC switch which is standard for 70-inch and 60-inch sleepers and optional for the 56-inch and 48-inch sleepers.

Posted on by Serafim 0

The Freightliner Columbia is a medium duty truck designed for short or regional transportation. The vehicle has a highly versatile character and can cope with various medium duty jobs. At the moment the truck is sold in South Africa, New Zeeland and Australia.

Designed to for construction or short haul applications, the Freightliner Columbia offers a light tare weight and ideal axle positioning, being available in 6x4, 8x4 and 10x4 configurations for construction work, and 4x2 or 6x4 for distribution jobs. Furthermore there is also the option of a Day Cab or a 34” Mid-Roof Sleeper.

Under the hood, the Freightliner Columbia is equipped with a Cummins ISLe5 engine which delivers a maximum output of up to 400 hp and 1,254 lb-ft of torque. Thanks to its powerful engine and the solid chassis the Freightliner Columbia can be rated to 40,000 kg Gross Combination Mass.

Posted on by Serafim 0

The Freightliner Century Class is around from some time now and was designed especially for long haul operations. The truck features a conventional cab configuration with an aerodynamic design which gives it a low drag coefficient.

Moreover, the Freightliner Century Class uses strong, lightweight components in the hood and fenders to reduce the overall weight thus allowing for increased payload. The truck has a gross vehicle mass (GVM) of 26000 kg for the 6x4 model and 30800 kg for the 8x4 version. There are also available both day and sleeper cabs and the truck is powered by a Detroit Diesel engine which develops between 470 hp - 525 hp.

Posted on by Serafim 0

The BMC Professional is a highly versatile range of commercial vehicles designed for medium and heavy duty applications. The BMC Professional is available with both sleeper and day cabs and comes with a cab over engine configuration.

The truck has a payload of up to 50000 kg and it’s powered by a range of Cummins engines which develop a maximum output of 410 hp and 2000 Nm of torque. The BMC professional is also offered with a choice of 4x2 and 6x4 axle configurations which makes it eligible for a wide range of jobs.

Posted on by Serafim 0

Foden has started to build trucks back in 1856 but after a history of 150 years the production was halted.

A significant milestone in the company history was the year 1980 when it became a division of Paccar Inc and has started to build models with its new partner. The last truck built by Foden and Paccar was named the Alpha and it was a cabover engine model powered by Cummins engines. The truck was sold in UK and New Zeeland until July 2006 when the company retired from truck production.

The Foden Alpha had a pretty versatile nature and thanks to its flexible chassis and the wide range of axle configurations it was suited for various heavy duty applications.

At the moment, the company continues to supply spare parts and service for its old trucks throughout the UK.

Posted on by Serafim 0

In 2009 the old Tatra Terrno 1 benefitted from a small facelift, as it received improved aerodynamics and a host of technical upgrades.

The Terrno 1 features a cab over engine configuration and is offered with a choice of 4x4, 6x4, 6x6 and 8x8 drives. Due to its versatile character, the medium duty truck can be used for various applications on any terrains as its King Frame combined suspension (mechanical leaf or coil springs and high-pressure air bellows) gives it capable off road abilities.

Posted on by Serafim 0

The T 810 is a cab over engine medium duty truck with a highly versatile character. Thanks to its wide range of versions, the Tatra T810 can be used for various applications and makes duties even in war zones as a military vehicle. Tatra designers combined a ladder frame with rigid portal axles to offer the truck a very high ground clearance which gives it capable off road abilities.

The vehicle is offered with two wheelbase lengths and a three-point superstructure mounting system which is combined with gross vehicle weights of up to 27.5 tonnes. Thanks to its versatile nature and the generous payload capacity, the Tatra T 810 also offers the possibility to be equipped with special superstructures or various bodies.

Posted on by Serafim 0

For Tatra it was very hard to survive to the difficult economic conditions and had also need to face a very strong competition coming from its European drivers. Luckily, in 2011 DAF acquired 19% ownership in TATRA and now it also supplies engines and cabs for the Czech manufacturer.

Tatra’s main product is now sold globally under the name of Phoenix. The Tatra Phoenix is part of the heavy duty league and can carry massive loads on both regular roads or on harsh terrains.

The truck features a unique chassis design which requires no sub-frame for affixing tipper body. This translates into more payload capacity hence lower costs per km.


1 2 3 4 5 next >
Back to top