Rigid Truck

Rigid Truck

Posted on by Serafim

For Tatra it was very hard to survive to the difficult economic conditions and had also need to face a very strong competition coming from its European drivers. Luckily, in 2011 DAF acquired 19% ownership in TATRA and now it also supplies engines and cabs for the Czech manufacturer.

Tatra’s main product is now sold globally under the name of Phoenix. The Tatra Phoenix is part of the heavy duty league and can carry massive loads on both regular roads or on harsh terrains.

The truck features a unique chassis design which requires no sub-frame for affixing tipper body. This translates into more payload capacity hence lower costs per km.

Posted on by Serafim

The Chinese manufacturers are starting to conquer more and more markets and their vehicles have finally begun to offer satisfactory performances and prove that these guys are fast learners. However, some faults regarding the build quality and reliability still remain, but some sacrifices had to be done to keep the price as cheap as possible.

The new generation of Heavy Duty trucks from JAC is a major improvement over the previous models, but while we appreciated the technical upgrade and the more comfortable cabin, we’ll have to criticize the exterior design. There isn’t anything inherently wrong with it, but it’s almost identical with Scania’s trucks and you won’t need to be an expert to spot the resemblance.

Posted on by Serafim

Not many of you heard about JAC, mostly because it’s a Chinese manufacturer which until recently didn’t managed to catch much attention. The company however, has recently made a joint venture with Navistar and started to use Cummins engines for its lineup of trucks.

At the moment, JAC is also in full expansion and plans to conquer new markets. Its lineup of vehicles includes light, medium and heavy duty models and all of them are fairly versatile.

The Heavy duty range of trucks is offered in tractor, mixer, dump and lorry configurations with gross vehicle weights ranging from 13000 kg to 50000 kg.

Posted on by Serafim

TheMercedes Benz Unimog is around for some time now, as it tackles the harshest working conditions since the Second World War. The Unimog is an iconic off roader which has built itself a very strong reputation being one of the most appreciated vehicles in its class.

The Unimog is the smaller brother of the Zetros and is offered in a wide range of versions with different engines and wheelbases. There are two Unimog families available the Unimog 300 - 500 and the Unimog 3000- 5000.

The Unimog 300, 400 and 500 range covers permissible gross vehicle weights from 7.5 t to 16 t, each model coming with a choice of two wheelbase lengths and two engine outputs.

The Unimog 300-500 are offered with a choice of four- and six-cylinder in-line engines from the OM 904 LA and OM 906 LA series.

Posted on by Serafim

In US, CAT sells only its CT660 vocational model, but in Australia its lineup includes two models namely the CT 610 and CT 630. Both Australian models were developed by NC2, a joint venture between Navistar and Caterpillar and you won’t need to be an expert to see that between CAT’s trucks and International’s models there is a strong resemblance.

While the CT660 has a totally fresh design the 610 model is based on the International DuraStar and TranStar models. These vehicles don’t share only the exterior design, but also the same interior and technologies. However, the CT610 isn’t powered by Cummins engines, as at its hart sits a 470 hp CAT engine. The CT610 is as versatile as its International siblings and was developed especially for regional haul applications.

Posted on by Serafim

Mercedes is planning to extend its trucks lineup with the addition of a new model. The fresh truck bears the name Antos and was specifically engineered for heavy duty short radius distribution applications.

The new vehicle has borrowed many technologies and design lines from the Actros which is its bigger brother, but it features a character of its own and a unique cab configuration that was designed specifically for short delivery purposes.

The Mercedes Antos will be offered with a choice of medium- and short-size cabs and will be available with a range of 13 engines that will meet the latest Euro VI emission requirements.

For the moment, Mercedes revealed only a few details about its new Antos, but the truck will make its global debut in Frankfurt at the Commercial Vehicle IAA in September, so stay posted for more information.

Posted on by Serafim

The Foton Auman is the biggest truck built by the Chinese manufacturer. The truck’s main advantages are that it uses Mercedes-Benz technology for its chassis and is powered by a range of Cummins engines.

While the Chinese trucks are still seen with doubtful eyes by the truckers from all over the world, the Foton Auman could prove to be of a different breed thanks to its American engines and the German technology used for the chassis.

The Auman is offered with a wide choice of wheel base lengths which range from 3400 to 6000mm and has a gross combination mass of up to 45 tonnes. In order to meet a wide range of operational needs, the Foton Auman is offered in various models including tractor, platform, dump and other.

Posted on by Serafim

The Volkswagen Worker is sold solely on the South American market together with the bigger Constellation model.

The truck was designed as a basic mechanical work horse which is able to do a wide range of jobs with minimum costs and maximum productivity.

The Volkswagen Worker range is offered with numerous wheelbases including 2,850, 3,300, 3,900 and 4,300 mm lengths with various GVWs (gross vehicle weights) that range between 8 tonne to 31 Tonne. Thanks to its long list of options and body versions the Volkswagen Worker is among the most versatile vehicles built by the German manufacturer.

Posted on by Serafim

Mercedes is well known for its nice luxury cars that can move you in full comfort from point A to point B. Everyone likes these cars, as they are like small oases of luxury and make you feel relaxed and safe wherever you are.

The German manufacturer however, has also a darker side. This time the intelligence of its engineers was put to work with the main purpose of constructing the ultimate heavy duty work truck. The result was the Zetros which is the toughest truck built by the company. The vehicle has a bullet proof build quality and it’s so tough, that even if you’ll drive it in the middle of a war zone it will feel just like a walk in the park.

The Mercedes Zetros is available in all-wheel drive, two-axle models with a gross vehicle weight of 16.5 or 18.0 tonnes, as well as three-axle vehicles with a maximum of 25.0 or 27.0 tonnes. The payload for the two-axle models is almost ten tonnes, while for the three-axle models it is 16 tonnes (excluding body weight).

Posted on by Serafim

The heaviest vehicle built by Hino is the 700 Series. The truck is around for some years now, but the newest version of Hino’s heavy duty model is starting to get closer and closer to its European rivals which currently set the standards in the cab-over engine segment.

The exterior design is still pretty basic, without having the potential to make any eyebrows rise in admiration, but what is going under the sheet-metal is what really counts, so most of the upgrades are starting to be observed only after you’ll fire the engine.

The Hino 700 is offered with a choice of different wheel base lengths that range from 4005 mm- 4575 mm and comes with GVMs (Gross Vehicle Mass) of up to 28.300 kg.


Back to top