Revealed in 2007 at the Pebble Beach Concours d’Elegance , the Aston Martin DBS is by far one of the most beautiful cars out there. With an unique design and pure performance, the supercar was designed to fill the gap between road and track.

2008 Aston Martin DBS
- image 326272

According to Aston Martin Chief Executive Officer, Dr Ulrich Bez, said: “The DBS is the ultimate expression of Aston Martin’s engineering and technical ability. It offers pure performance without compromise.

Featuring flowing curves, complex surfaces and an unrivaled sculptural beauty, the DBS is a classic Aston Martin in its every inch, but in the same time its aerodynamic excellence and impressive performances are the characteristics of a modern sports car.

2008 Aston Martin DBS
- image 326332

When creating the DBS, Aston Martin focused on achieving the right balance between strength and mass, reason why, like DB9 and the DBR9 and DBRS9 race cars it is built on the VH (Vertical Horizontal) architecture. Thanks to this structure, the weight is being kept to a minimum, and with the front-mid mounted engine and rear-mid mounted transaxle the company obtained a near perfect weight distribution: 85%.

Under the hood there is a hand-built V12 engine producing a total of 510 hp at 6500 rpm. The 3.71:1 final-drive ratio ensures that the additional power is usable, enhancing in-gear acceleration in particular. The car’s performance figures are more than impressive: a top speed of 191mph (302km/h) and a 0-62mph (0-100km/h) time of 4.3 seconds.

2008 Aston Martin DBS
- image 326419

A combination of elegant design, innovative manufacturing processes, race-derived materials and components and Aston Martin’s unrivaled hand-build expertise makes the DBS a luxury sports car without equal. The price for the DBS starts at $269,000, but it remains a car with no competitor.


The need for high-performance stability, handling ability and low kerb weight defined the DBS’s form and construction. Accordingly, the DBS becomes the first production Aston Martin to make extensive use of ultra-light carbon-fibre body panels. High levels of performance and control are delivered by the combination of inherent light weight, near-perfect weight distribution, a supremely powerful and flexible V12 engine, and a performance-honed six-speed transmission, together with new carbon ceramic brakes and an adaptive damper controlled suspension system.

2008 Aston Martin DBS
- image 326377

At the heart of the DBS is a 6.0-litre V12 engine. The DBR9 and DBRS9 race cars are powered by an enhanced version of this same V12, tuned to produce in excess of 600bhp. The shared powerplant continues the strong link between Aston Martin’s road and race cars, just as the six-cylinder engine used in the DBR1 inspired a generation of engines in the DB4, DB5 and DB6 in the 1950s and 60s.

As with all current Aston Martins, the engine is hand-assembled at Aston Martin’s dedicated engine facility in Cologne, Germany. The classic 6.0-litre V12 features a number of power-increasing enhancements. These include a ‘by-pass’ engine air intake port that opens above 5500rpm to allow more air into the engine, and re-profiled air inlet ports that further improve airflow into the combustion chamber. Combined with a compression ratio of 10.9:1, the result of these enhancements is prodigious power and torque: the DBS delivers 380 kW (510 bhp/517 PS) at 6500 rpm. The 3.71:1 final-drive ratio ensures that the additional power is usable, enhancing in-gear acceleration in particular.

2008 Aston Martin DBS
- image 326308

A lightweight, rigid structure is the design engineer’s ultimate goal, and achieving the right balance between strength and mass is crucial. Like the DB9 and its sibling DBR9 and DBRS9 race cars, the DBS uses Aston Martin’s class-leading all-alloy VH (Vertical Horizontal) architecture, a lightweight bonded aluminium structure that provides outstanding strength and rigidity. Aston Martin’s engineers have also employed advanced materials and processes to further reduce weight and increase the DBS’s performance and dynamics.

Carbon-fibre panels are used for the boot enclosure, boot lid, door opening surrounds, front wings and bonnet, giving a saving of some 30kg over more conventional materials without any reduction in strength. “There are no restrictions on form or shape in using carbon-fibre,” says Marek Reichman, Aston Martin’s Design Director, “and the material allowed us to wrap bodywork around the 20" wheels and maintain the precise relationship between the wheel and the bodywork.”

2008 Aston Martin DBS
- image 326310

Each panel has been carefully sculpted to direct the airflow around the car, into the engine and to help cool the braking system. The carbon-fibre elements are produced using advanced manufacturing techniques developed from the aerospace and motorsport industries.

The new panel-making procedure also delivers an industry-best surface finish, thanks to a patented ‘Surface Veil’ process. The application of a 200 micron layer of epoxy and glass to the panel delivers a class-A surface that is in line with Aston Martin’s tradition of high-quality finishes. Inside the car, the weave patterns on the exposed carbon-fibre elements have been carefully selected to present the most harmonious surfaces.


2008 Aston Martin DBS
- image 326316

As with the DB9 and DBR race cars, the Aston Martin DBS benefits from the inherent characteristics of the VH architecture. The VH underframe consists of pressed, extruded and cast aluminium components, bonded together to create an immensely strong underlying structure.

This structure means that weight is kept to a minimum, with the front-mid mounted engine and rear-mid mounted transaxle ensuring a near perfect weight distribution: 85% of the car’s weight is positioned within its wheelbase. The DBS’s polar moment of inertia is therefore very low, producing a car with natural agility, a strong, stable platform for the V12’s high power output and an exhilarating driving experience.

2008 Aston Martin DBS
- image 326313

To take full advantage of its extremely precise and rigid platform, the DBS employs a new and sophisticated Adaptive Damping System (ADS) which uses two separate valves to set the dampers to five different positions, allowing instant adjustment of the car’s ride and handling characteristics. The ADS automatically alters the suspension settings to ensure the driver has high levels of control at all times, with the ability to respond instantly to different driving conditions. The dampers can be ‘softer’, with a corresponding improvement in ride quality, or ‘firm’, providing improved body control for more spirited driving.

The damper settings are determined by an electronic control unit which takes sensor readings from the car’s systems, including throttle position, brake position, steering wheel rotation and vehicle speed. This data establishes the prevailing driving conditions and the demands the driver is making on the car.

2008 Aston Martin DBS
- image 326317

The DBS’s Adaptive Damping System perfectly captures the car’s sporting character, ensuring that stiffer dampers are available for better handling and control when the car is being driven enthusiastically, without compromising ride comfort during ‘normal’ driving conditions. A designated ‘Track’ mode automatically sets all dampers to their firmest positions, making it ideal for circuit driving. The DBS is fitted with Pirelli P-Zero tyres that have been developed especially for the car, along with new 20" lightweight alloy wheels.

The DBS also has a revised Dynamic Stability Control (DSC) system, designed to help maintain maximum traction in challenging driving conditions. In default operation, the DSC is automatically on. Select and press the button for two seconds and DSC ‘Track’ mode is engaged, raising the threshold at which the system intervenes to allow the experienced driver to explore the car’s limits. Hold the button for four seconds and DSC is disengaged entirely.

2008 Aston Martin DBS
- image 326367

The car’s braking system features another innovation, the first time Carbon Ceramic Matrix (CCM) brakes have been used on a road-going Aston Martin. The end result is shorter stopping distances with excellent resistance to fade in even the most demanding driving conditions. CCM brakes are also some 12.5kg lighter than a conventional system, reducing the weight of the car overall and, in particular, the unsprung weight and rotational masses, further enhancing the performance of the suspension.


The DBS is manufactured using the finest materials, with a combination of hand-finishing and pioneering high-technology processes. From the exceptional quality of the design and finish to the advanced production techniques employed to save weight and create strength, the DBS is both a technological masterpiece and a powerful visual and tactile experience, inside and out.

2008 Aston Martin DBS
- image 326289

The DBS is the culmination of the DB bloodline, a synthesis of race-bred technology and road-going practicality that can be traced back to the iconic DB2, DB3S and DB4GT, and is continued today with the DBR9 and DBRS9 race cars. The DBS’s powerful, flowing form fuses the visual language of the DBR9 GT1 race car with the innate elegance of the DB series. Lower and tauter than other Aston Martin production models, the DBS has subtly flared wheel arches accommodating standard 20" diameter wheels and tyres. These provide excellent stability and grip, while giving the car a muscular and athletic stance that evokes the DBR9 and DBRS9. The design process involved continuous revision and honing of the DBS’s surfaces, ensuring that the shapes and forms represent perfectly the car’s inherent power, while never diluting the fundamental proportions that are the essence of every Aston Martin.

The external detailing reflects the power and dynamic abilities of the DBS, with revised inlets and enlarged grilles that deliver more air into the engine and increase its cooling capacity. Subtle design details include a new five-bar design for the polished alloy main grille, as well as two additional vents in the enlarged power bulge on the carbon-fibre bonnet. These vents are entirely functional, improving engine performance and efficiency, yet also communicating the increased power output of the uprated V12 engine.

2008 Aston Martin DBS
- image 326356

The DBS’s aerodynamic enhancements are shaped by Aston Martin’s racing experience. A carbon-fibre splitter and a new front bumper design help channel airflow around the car’s wider bodywork. The aerodynamics team worked hand in hand with the modelling team to ensure that the forms and surfaces of DBS were sculpted for inherent stability at high speeds.

The widened front and rear track improve handling and give the car a more muscular character. To accommodate this additional width, the surfaces of the wings have been sculpted and re-shaped with harder lines, which also serve to emphasise the car’s strength and power. The lowered ride height is accentuated by the enhanced side sills, carefully profiled to improve aerodynamic performance and reduce drag along the flanks. The iconic Aston Martin side strake, a design feature of every DB car since the DB4, has been redesigned for the DBS, incorporating a side repeater formed by a bank of LEDs.

2008 Aston Martin DBS
- image 326371

Improved aerodynamics shape the rear of the DBS, where the more prominent boot spoiler is carefully incorporated into the carbon-fibre boot lid. A horizontal chrome finisher is set into the lid to accentuate the wide track of the new car. The car’s flat undertray helps to improve the aerodynamics of the underbody surface and culminates in a new carbon-fibre rear diffuser, another feature carried over from the race cars. This device creates an area of low pressure beneath the rear of the car, reducing lift and improving high-speed stability without the need for large, unsightly external spoilers. The new one-piece diffuser also incorporates the DBS’s large and distinctive twin exhaust tailpipes.

The interior of the DBS represents the epitome of Aston Martin’s commitment to using materials honestly, without disguise or embellishment. Lightweight materials are used throughout to save weight; door pulls are made from carbon-fibre, for example, and the carpet has been woven with lighter fibres to save valuable kilograms. Special semi-aniline leather is used throughout the cabin, saving weight as well as giving a soft feel and distinctive aroma.

2008 Aston Martin DBS
- image 326350

The DBS features unique primary controls, including a new steering wheel profile with a twin-stitched detail marker that indicates the ‘on-centre’ position. The gear knob is fashioned from polished alloy to echo the metallic finishes on the new centre console. The instrument cluster is designed with white numerals on a dark graphite background for excellent legibility. The twin-stitch pattern runs through the interior as a signature device; the alignment of both stitch lines is testament to Aston Martin’s ongoing tradition of exceptional craftsmanship.

The DBS start sequence blends tradition with high technology and a touch of theatre. The ignition ECU (Emotion Control Unit) has evolved into a machined and highly tactile polished glass ECU, incorporating a stainless steel inner case. Resembling a fine wristwatch or a piece of contemporary sculptural jewellery, this glass ECU epitomises the spirit of the DBS.

2008 Aston Martin DBS
- image 326343

To operate the car, the glass ECU is inserted into a special docking station in Aston Martin’s signature dashboard-mounted glass starter button, and glows red to indicate when the car is ready to start. The engine is fired by pressing the ECU flush with the surface of the starter button. After pressing to stop the engine, the ECU automatically motors out of the dashboard for removal.

The start sequence of the DBS is augmented by an all-new centre console design with a cast metal surround, crisp typography and new graphics. The new console has a traditional dial-face clock at the centre, flanked by two rotary controls for the heating and air-conditioning system, fashioned from solid, turned aluminium.

These controls are also used to navigate the audio system, Bluetooth telephone preparation and satellite navigation functions. The Aston Martin 700 W Audio System, with Dolby® Pro Logic II® has been exclusively developed for Aston Martin to provide outstanding sound quality. A slot for the six-CD autochanger is located at the top of the console, while within the centre armrest cubby box there is inbuilt connectivity for MP3 players. Bluetooth telephone preparation is standard on the DBS, enabling you to synchronise your mobile telephone directory through the car’s display screens. It can also display the last 10 calls received, made and missed.


2008 Aston Martin DBS
- image 326342

Introduced as an alternative to the standard six-speed manual gearbox, DBS customers will now be afforded the option of the ‘Touchtronic 2’ six-speed automatic transmission. Derived from the same ZF transaxle unit that was developed for the DB9, the system has been substantially re-engineered to accommodate the power and performance characteristics of the DBS.

The DBS Touchtronic transmission features a final drive ratio shortened from 3.15:1 to 3.46:1, aiding quicker acceleration times and an improved performance feel. Additionally, changes to the gearbox calibration aid more aggressive gear shifts and greater usability, while retaining the performance potential of the manual gear box – matching the 0-60mph (0-100km/h) time of 4.3 seconds. System functionality is consistent with that on the DB9, with ‘Park’, ‘Reverse’, ‘Neutral’ and ‘Drive’ modes selected via facia mounted controls.

2008 Aston Martin DBS
- image 326418

When in ‘Drive’ mode, pulling either of the leather-trimmed magnesium alloy paddles mounted on the steering column will activate Touchtronic mode, enabling the driver to control gear shifts via the paddles. Touchtronic mode is also accessible directly on engine start-up. Alternatively, the ‘Drive’ mode can be selected at any time by pressing the ‘D’ control on the centre console, engaging a fully automatic mode which will select the most appropriate gear for the speed and driving conditions automatically.

The system also includes a ‘Sport’ mode - activated by a button on the centre console – which engages a more aggressive gear shift strategy as gear changes feel sharper and more forceful, engine speed matching on downshifts is more aggressive and in full automatic mode, upshifts occur at higher speeds. The Sport setting also incorporates a more responsive throttle map to match the high-performance characteristics of the DBS.
Bang & Olufsen Audio

2008 Aston Martin DBS
- image 326345

The DBS will now also benefit from the installation of a new Bang & Olufsen BeoSound system – developed specifically for the DBS – as standard equipment. The BeoSound DBS system produces a total power output of 1000w, delivering the sound image through a total of 13 channels across 10 speaker locations. Adopting new speaker grille designs throughout the car and acoustic lenses which rise out of the facia, the system offers customers an unrivalled audio experience.

Enhanced Option Range

After evaluating customer feedback the DBS will now also be offered with an optional 2+2 seating configuration, where the rear storage areas are replaced with two seats. A 2+0 arrangement – where two storage areas populate the rear environment – remains standard.

2008 Aston Martin DBS
- image 326359

Also introduced to the DBS is the option of a new ten-spoke 20’’ forged aluminium wheel with diamond-turned surface – available in either silver or graphite finishes. The optional wheel delivers a total unsprung mass reduction of 8kg versus the standard cast wheel, aiding enhanced handling and improved acceleration and braking performance.



  • Two-door coupe body style with 2+0 seating
  • Bonded aluminium VH structure
  • Aluminium, magnesium alloy and carbon fibre composite body
  • Extruded aluminium door side-impact beams
  • High Intensity Discharge headlamps (dipped beam)
  • Halogen projector headlamps (main beam)
  • LED rear lamps and side repeaters
2008 Aston Martin DBS
- image 326357


  • All alloy quad overhead cam 48 valve 5935cc V12
  • Compression ratio 10.9:1
  • Front mid-mounted engine, rear-wheel drive
  • Fully catalysed stainless steel exhaust system with active bypass valves


  • Rear mid-mounted six-speed manual gearbox
  • Rear mid-mounted ’Touchtronic 2’ six-speed gearbox with electronic shift-by-wire control system
  • Alloy torque tube with carbon fibre propeller shaft
  • Limited-slip differential
  • Final drive ratio - manual: 3.71:1
  • Final drive ratio - automatic 3.46:1
2008 Aston Martin DBS
- image 326380


  • Rack and pinion, Servotronic speed-sensitive power-assisted steering, 3.0 turns lock to lock
  • Column tilt and reach adjustment

Wheels and Tyres

  • Front: 8.5’’ x 20’’ Pirelli P Zero 245/35
  • Rear: 11’’ x 20’’ Pirelli P Zero 295/30


  • Adaptive Damping System (ADS) with Track mode
  • Front: Independent double wishbones incorporating anti-dive geometry, coil springs, anti-roll bar and monotube adaptive dampers
  • Rear: Independent double wishbones with anti-squat and anti-lift geometry, coil springs, anti-roll bar and monotube adaptive dampers
2008 Aston Martin DBS
- image 326334


  • Dynamic Stability Control (DSC) with Track mode
  • Anti-Lock Braking System (ABS)
  • Electronic Brakeforce Distribution (EBD)
  • Emergency Brake Assist (EBA)
  • Traction Control
  • Front: Ventilated carbon ceramic discs, 398mm diameter with six-piston calipers
  • Rear: Ventilated carbon ceramic discs, 360mm diameter with four-piston calipers


  • Semi-aniline leather and Alcantara interior
  • Matrix alloy facia trim and Iridium Silver centre console finish
  • Carbon fibre door trims and door pulls
  • Auto-dimming rear-view mirror with garage door opener (USA & Canada only)
  • Electrically adjustable seats
  • Memory seats & exterior mirrors (three positions)
  • Dual-stage driver/passenger front airbags
  • Side airbags (sports seats only)
  • Heated seats (sports seats only)
  • Heated rear screen
  • Automatic temperature control
  • Organic electroluminescent (OEL) displays
  • Trip computer
  • LED map lights
  • Cruise control
  • Hard Disk Drive (HDD) satellite navigation system*1,2
  • Bluetooth® telephone preparation*1
  • Powerfold exterior mirrors
  • Front and rear parking sensors
  • Tyre pressure monitoring system*1
  • Alarm and immobiliser
  • Remote-control central door locking and boot release
  • Umbrella and holder
  • Battery Disconnect Switch (BDS)
  • Battery conditioner
  • Tracking device (UK only)*3
  • Boot-mounted umbrella
2008 Aston Martin DBS
- image 326354

In-Car Entertainment

  • Bang & Olufsen BeoSound DBS sound system
  • Integrated Apple iPod® connector*4
  • USB connector with Waveform Audio Format (WAF), Windows Media Player (WMA) and MPEG (MP3) audio file compatibility
  • 3.5mm auxiliary socket


  • 20" alloy wheels with Graphite finish
  • 20" 10-spoke diamond turned alloy wheels
  • 20" 10-spoke diamond turned graphite painted alloy wheels
  • 2+2 Seating
  • Satellite radio system (USA only)
  • Piano Black facia trim and centre console finish
  • Leather storage saddle
  • Personalised sill plaques
  • Auto-dimming interior rear-view mirror*1
  • Auto dimming interior rear view mirror with garage door opener (Europe only)
  • Alarm upgrade (volumetric & tilt sensors)
  • Tracking device*1/3
  • First aid kit
  • Ashtray and cigar lighter
2008 Aston Martin DBS
- image 326363


  • Length: 4721mm (185.9’’)
  • Wheelbase: 2740mm (107.9’’)
  • Width: 1905mm (75’’) exc. Mirrors 2060mm (81.1’’) inc. Mirrors
  • Fuel Tank Capacity: 78 litres (17.2 Imp gall, 20.5 US gall)
  • Height: 1280mm (50.4’’)
  • Weight: 1695kg (3737 lb)


  • Max speed: 191mph (307km/h)
  • Max power: 380kW (510bhp/517 PS) @ 6500 rpm
  • Acceleration: 0-100km/h (62mph) 4.3 seconds
  • Max torque: 570 Nm (420 lb.ft) @ 5750 rpm
2008 Aston Martin DBS
- image 326416

Fuel consumption – manual

  • Litres/100 km (mpg)
  • • Urban 24.3 (11.6)
  • • Extra-urban 11.7 (24.1)
  • • Combined 16.4 (17.3)

CO2 emissions

  • 388 g/km - manual

Touchtronic 2 Option Specs

  • Urban: 11.7mpg
  • Extra Urban: 26.8mpg
  • Combined: 18.2mpg
  • Combined CO2: 367g/km
2008 Aston Martin DBS
- image 326335


  • 0-62mpg: 4.3s
  • Max speed: 191mph
  • Kerb weight: 1,740kg


Model Price
5.9 Auto Coupe $273,000
5.9 Coupe $269,000
2008 Aston Martin DBS
- image 326347


Option name Price
Satellite Radio $1.250
Delete Model Badging N/A
Garage Door Opener $295
Smokers Pack $220
First Aid Kit $145
Fascia Trim Piano Black $1.595
Alarm Upgrade $295
Carpet Color - Contemporany $450
Contrast Carpet Binding $220
Fine Stitching $220
Headlining Color - Contemporany $450
Leather COlor-Out of range/ match to Samp $4.545
Leather Color Contemporany $750
Paint - Contemporany $750
Personalized Sill Plaques $295
Polished Alloy Treadplates $450
Steering Wheel - 12 O’clock Stitch N/A
Paint - Other Manufacturer’s Color $2.805
Paint - Other Manufacturer’s Special Color $3.785
Paint - Previous AML Color $1.895
Paint - Special AML COlor/Match to Sampl $3.785
2+2 Seating arrangement $3.785
20" 10-Spoke Graphite Diamond Turned Wheels $3.785
20" 10-Spoke Silver Diamond Turned Wheels $3.190
Standard Wheel Graphite Color $750
2008 Aston Martin DBS
- image 326273
Alina Moore
Alina Moore
Alina Joined the team in the early 2000s as one of the outlets very first experts, and she’s been with ever since. Over the years, she’s served various roles, but today she’s is relied on heavily to verify automotive facts, assist with formatting, and discover new and engaging topics.  Read full bio
About the author
What do you think?
Show Comments


  (534) posted on 01.27.2010

this is a great car, aside from it’s 191mph speed, it has good handling, good breaks, and very nice interiors. Props to this one!

  (4) posted on 04.14.2009

nice car... seems aerodynamic and fast

Car Finder: