• 2006 World fastest Bentley - MTM Bentley Continental GT “Birkin Edition”
  • Year:
  • Make:
  • Model:
  • Engine:
  • Horsepower @ RPM:
  • Torque @ RPM:
  • Top Speed:
    205 mph
  • body style:

The Bentley Continental GT is a perfect car, you would think at least. And everyone would agree with this. Nevertheless, Motorentechnik Mayer has a number of tuning measures up its sleeve which accentuate its strengths without distorting its character. For example, besides a compact attachment at the rear, no measures are implemented that might detract from the elegant appearance of the Continental GT. MTM was not looking to alter the characteristic and unmistakable shape. To add the finishing touch, the Bavarian tuning specialist equips this British car with a set of chunky 21 inch bimoto alloy wheels. However, a great deal more is going on beneath the bodywork of a Bentley Continental GT from MTM. So much so that MTM can boast about having the fastest Bentley ever!

Fastest Bentley ever!

MTM supplies various performance kits. The spectrum ranges from optimized programming of the control electronics through to the complete conversion of the engine unit. All the versions have been developed by MTM on its proprietary dynamometers and thoroughly tested in road and racing use. 560 bhp as standard and a top speed of 197 mph should actually suffice for the highways of this world. True... but only if it wasn’t possible to achieve more. In an initial power class, MTM boosts the power of the 12 cylinder engine by recalibrating the engine electronics to 635 bhp / 467 kW and the torque to an impressive 575 lbs-ft. With the second performance kit, MTM conjures up to 650 bhp / 478 kW out of this large 6-liter W12 engine, which then generates a staggering 586 lbs-ft with ease instead of the already impressive 479 lbs-ft of the production version. The 2.5 ton blockbuster converts this increased torque in 4.2 seconds for the sprint from "zero to hundred" (series: 4.8 s). A small world lies between the series and MTM top speed. On the high-speed Nardo oval in Italy, where the 186 mph+ elite meet up every year for a showdown, the MTM Continental GT produced the proven 205 mph! This makes it the fastest Bentley ever built.

The Continental GT is allowed to make this increased power public by means of an MTM exhaust system from the catalytic converter, including a center and end muffler with throttle control. The exhaust system is included in power class II. The MTM exhaust systems are developed on a dyno. The crucial factor in the development is to ensure a maximum level of throughput and performance whilst abiding by the legally prescribed noise limit values. By means of an intelligent choice of material, namely high-grade, polished stainless steels, MTM achieves a low-weight design, which offers maximum durability at the same time. A 4-pipe rear apron visual effect is available both for the sound-optimized MTM exhaust system and for the standard-fitted exhaust system.

Know-how from the racing circuit

When it comes to suspension systems, Bentley has always drawn on unlimited resources. Nevertheless, to lend this high-performance car a sportier look, MTM is offering an electronically lowered suspension by means of a complex reprogramming of the software. In this regard, the calibration developed in Nardo and Hockenheim ensures a maximum level of ride comfort and the necessary residual spring travel is retained by the solution offered by MTM. The sportier look obtained by lowering the suspension harmonizes perfectly with the MTM "bimoto" wheel rims, which MTM supplies for the front and rear axle in the dimension 10.5x21" ET40 LK 5x112 in the variants "polished titanium" and "shiny silver". Needless to say, MTM also supplies the rims as a complete set of wheels. They are combined with Dunlop tires in the size 285/30. The MTM alloy rim has been developed to ensure the problem-free fitting of the MTM sports braking systems. To enable cars of this output class to brake more safely, upon request, MTM will equip a sports braking system on the front and rear axle, thereby making a valuable contribution to the road safety aspect. This involves equipping a two-piece brake disc in the dimension 412x38 on the front axle and 355x28 on the rear axle. No change is made to the handbrake function.

About the author
What do you think?
Show Comments


  (111) posted on 11.11.2007

nice now bill gates can even enter the F1 lol

Car Finder: