It includes everything you’ll need to deconstruct your Jeep

The Jeep brand’s foundation is based on utility and preparedness, so it comes as no surprise that the 2018 Wrangler JL comes with its own toolkit. The kit comes with a socket wrench and the drivers needed to remove the doors and fold the windshield – two very important aspects of Wrangler ownership.

The toolkit trend started a few years ago with the Wrangler JK, but Jeep is keeping the idea alive. The kit comes in a snazzy nylon pouch with a Velcro latch. Inside are elastic bands that hold the tools in place. The kit includes a min socket, a T40 and T50 Torx bits and an M15 socket. The T40 is used for the various parts of the soft top, while the T50’s main job is removing the bolts holding the door hinges in place. The T50 is also used to remove the track system of the Sunrider soft top.

Folding the windshield requires removing the windshield wipers. That takes the M15 socket. Simply pop off the caps at the wiper hubs and remove the nut. Use the T40 to remove the four bolts holding the windshield header bar to the Sports Bar support and boom – the windshield easily folds down. Two more T40 bolts on the windshields two hinges will have the entire windshield assembly removed from the Jeep.

Best of all, the Wrangler offers a custom-fit storage holder for all this hardware. Lift up the cargo floor, and holes are pre-made and labeled in the plastic tray found underneath.

Jeep also includes a handy instruction guide with photos and labels. The instructions are on thick, laminated paper that should last a while, especially when kept in the clear plastic pocket inside the took kit pouch.


2018 Jeep Wrangler

2018 Jeep Wrangler
- image 742104

Read our full review on the 2018 Jeep Wrangler.

2017 Jeep Wrangler

2017 Jeep Wrangler High Resolution Exterior
- image 687100

Read our full review on the JK-gen 2017 Jeep Wrangler

What do you think?
Show Comments
Car Finder: