LISTEN 06:26

Any Ferrari is cool, and yes we said any, even the 1980’s 400i sedan. As long as there is a prancing horse on the hood, these cars are destined to be cherished for generations to come. The Ferrari 348 series is no different and it spawned one of the most loved modern Ferrari’s in the 355 model. One issue that people tend to have with the 348 is that there was a lack of power from its V8. All that really means is that when you take a 348 Challenge model and bolt on some serious power upgrades you’ll end up with a super cool Ferrari.

Steve Maxwell and Stacey Slead were two men that fell in love with the original driving dynamics of the 348 and put in some serious effort to make this one of the most powerful 348s on the road today. The two became friends when Maxwell was selling his Ferrari 348 and Slead wanted to buy it after a one-night test drive. Soon after Slead became the owner and Maxwell turned into a mad mechanic handcrafting over 200 pieces for the Ferrari it has now become.

After a few new donor Ferraris, a near death experience, and plenty of late nights deciding how to put it all together this Ferrari now makes over 600hp and eats newer models for breakfast. A challenge model Ferrari is nothing to take lightly in the first place, but adding turbochargers and a host of other one-off performance pieces can turn your run-of-the-mill Ferrari into an entirely different animal.

Hit the jump for more details on this Ferrari 348 Twin Turbo.

The Engine Build

1989 Ferrari 348 TB

1989 Ferrari 348 TB
- image 323788

The car that Maxwell had sold to Slead was the beginning of the project and Maxwell began working on the engine immediately. Others had taken this Ferrari V8 and built turbo versions that worked well and produced a lot of power, so they decided to follow the same plans. The engine and mechanical workings of the vehicle were the most heavily modified pieces and the engine itself received low compression pistons, new valves, ported and polished cylinder heads, and machined guideplates to match the ports perfectly. Moving away from the engine block they decided to get a pair of mandrel-bent equal length headers and mate those to a stainless steel exhaust system to cut weight.

Turbocharged engines make much more heat than a normally aspirated unit and therefore cooling needed to be addressed. The team ordered two very large radiators and a liquid intercooler. One issue with modifying a Ferrari is that every inch of space is already being used. Therefore they had to fabricate aluminum ducts in the bumper to increase airflow as well as move the battery into the trunk compartment. Even without the new T3/T4 turbochargers powered up, the engine modifications and 8.75:1 compression ratio helped the engine make more power than ever before.

Putting It All Together

The biggest problem encountered by the two was with the body of the Ferrari. On a quick trip to a neighborhood Wal-Mart, the car was sideswiped by a handicapped driver in the parking lot. Luckily they found a car for sale in Michigan that was actually one of the factory racing models, a 348 Challenge. This car was ideal because it had no insulation, sound deadening, or weight added by a luxurious interior. The stronger chassis made possible by solid metal suspension joints and factory roll cage also made things that much better. The car did have imperfections, but Maxwell had everything set straight at GA Coachworks where the body and paint were redone.

It was finally time to put the original engine in the new car and begin to finish the project. Right as everything was beginning to fall into place a small miracle happened. The team learned of a Ferrari 355 which had crashed and was now being sold as parts. They had the idea of upgrading the running gear of their car and immediately bought the suspension pieces and gearbox from that car and began to plan how the new pieces would fit together. Basically every mount on the car needed to be changed and they machined new crossmembers, and machine arms for the gearbox. In order to keep cost down and reliability up, they used many Toyota pieces for things like the alternator and coil-on plug coils.

Interior modifications were mainly for function and not aesthetics. They were able to use a modified 355 shifter with a new center console. The computer system used was a DTA Fast system from England. This allowed for traction control, launch control, wet traction control, boost control, idle motor control, sequential injection, and drivers for each individual coil. Having every system run off one computer also helped to increase reliability and this particular unit interfaced with the Bosch sensors well.

1989 Ferrari 348 TB

1989 Ferrari 348 TB
- image 323791

Road Test From Hell

After everything was completed, the duo took their new Ferrari out for a little test run. It was time to open her up on the freeway and the car began to steadily climb into the 150mph range. Slead quickly realized that as he let off the gas the car was still accelerating…160mph and counting. Clearly something was amiss and the car pulled strongly into 170mph territory. Nnot looking to smash their new project into the freeway divider, Maxwell hit the emergency stop button just as the car crested 180mph. After a quick change of underwear the team got the Ferrari up on the dyno to see what was going on. As the car began to hit high speeds, the engine literally lifted several inches off its mounts showing that it had broken all the brackets. When this occurred the throttle would jam wide open under the intercooler providing an answer for the theatrics from the earlier road test. The team has since rectified the problem and can now drive this beastly Ferrari complete with its 609hp and 486 lb-ft of torque without worry.

1989 Ferrari 348 TB

1989 Ferrari 348 TB
- image 323785
  • Leave it
    • Not for the weekend mechanic
    • Reliability issues

Source: European Car

Matt McDonald
About the author
What do you think?
Show Comments


  (498) posted on 12.19.2011

I wonder how much the whole project costs. The 1994 348 would alone cost more than a hundred grand. Add to that the parts needed for this particular setup, and all I can say is that this one isn’t going to be cheap.

  (372) posted on 12.14.2011

I love the design on its side rims; it looks so aggressive on that, and I have to agree that it’s really a good thing that it is not a hideous vintage car just like the other outdated vehicle.

  (399) posted on 12.12.2011

I love this vintage vehicle! I also love the fact that it has an increased on its performance. Well, this is really so cool. However, I still find out that there are more powerful outdated vehicles than on this one.

  (441) posted on 10.4.2011

To be honest, I don’t like the looks and styling that this sports car had. However, I must say that the engine that it had been quite impressive for me. I noticed that the mileage gives the elegant appearance on it, I guess.

  (484) posted on 08.5.2011

I think I’ve seen this version of Ferrari from Acura, and I just want to know who first release this kind of version. I just want to know who was the original creator. Since it is old already, I doubt its reliability.

  (596) posted on 08.4.2011

The styling of the car still looks so vintage! Well, it’s great to know that they have upgraded its engine performance. The twin turbo that was used in the car had added an incredible output in the vehicle. 

  (419) posted on 08.4.2011

The tweaked in the performance of the car is quite impressive! Ferrari has successfully increased the figure performance of the car. BTW, I like the sound of its engine it has an operatic sound.

  (569) posted on 07.11.2011

Agreed. I have to admit that the performance of this car is quite impressive though the styling is kind of outdated. Well, I guess boosting the power output of this car is really a big challenge!

  (553) posted on 07.11.2011

Meaning, they are planning to make a production for this vintage car? Most of the car is using the Twin Turbo and some of the high speed performing vehicle try to use three so I guess upgrading the engine of the 348 Challenge is not a big news at all.

  (472) posted on 07.8.2011

Well, its a good thing that they are successful in upgrading the performance of the this Ferrari car which I think its quite challenging. However, I wonder why there is a reliability issue regarding this car.

  (428) posted on 07.8.2011

haha. So it means that the powerful version of the V8 engine technology for the Ferrari 348 was born in credit of Maxwell-Slead love story? The bottom line would be these couple have made an impressive performance for this model which most of the drivers really enjoyed!

  (530) posted on 05.20.2011

Well, all that I can say is that I am quite amazed with this build. Imagine that, they were able to cram in that much power in the Ferrari’s engine. And they made it look good too.

  (683) posted on 05.13.2011

It is the useless and waste less thing of vintage image concept, Who the hell will be going to like this type of vintage car its skinny of model shape that I can say Its not the ideal vintage car. 

  (534) posted on 05.11.2011

Listening to the sound of the engine makes me to conclude that it will give a better handling and performance! BTW, I have read that its going to use a turbocharged engine and it makes me wonder if this car would be in the high price tag?

  (778) posted on 05.11.2011

This prancing horse car really has an awesome performance and look. I would say that even the platform is old already, there are some part of it that looks so modern. BTW, due to its vintage engine the reliability issue has arise!

  (452) posted on 05.6.2011

I should say that this type model is not as good for other vintage car,I’m not sure the total speed accuracy of this car not kinda amazing output.

  (472) posted on 05.6.2011

With all the details listed above, i don’t get why they called this car not good for weekend mechanic?hmm.. It seems that you guys weren’t impressed by the video.

  (273) posted on 05.6.2011

Well, its not a bad customization for Ferrari cars I think the pricing of this would be cheaper. And i think they questioned the reliability of this car since its old already..

  (398) posted on 05.5.2011

Its kinda supernatural concept of car, I don’t like the body structural of this kind of model,I think it would be great if its focus on how to make it more appealing in its exterior outlook of this car.

  (449) posted on 05.4.2011

I would say that the cars of Ferrari is not as hideous as those to other vintage car. Their design seems to be more better looking and sporty and when it comes to the performance its awesome as well.

Car Finder: