Cleveland CycleWerks was especially known for its retro looking motorcycles, but now the company has entered on a totally new realm with the addition of the FXx model.
The new FXxis looks like a geniune dirt bike, but the company says it is something else. For the moment we don’t have a pretty clear image about what this motorcycle might be as the only words said by Cleveland were: “The FXx is not a dirt bike, it is not a mountain bike, it is a cross between the two. A small, lightweight bike that can take you to places and allow you to do things that heavier and bigger bikes can’t.
At least we have the complete technical spesc which clearly suggest that we are looking a at pretty capable motorcycle.
Power comes from a 110cc 4-stroke single engine which is paired with a kick starter. The engine is mounted on a steel frame that seems to incorporate the fuel tank.
To be able to deal with any type of terrain without baking down, the motorycle is equipped with a pair of light 21 inch wheels which are wrapped in knobby tires.
You also get a narrow seat, disc brakes and a 22 mm carburettor. The new model is priced at 2100 EUR.
Hit the jump for more information on the Cleveland CycleWerks FXx.
The Cleveland CycleWerks Ace Standard is a pretty basic motorcycle that puts functionality and efficiency on top of its priorities list. Thanks to its flexible personality, low seat height and light weight, the Ace Standard is ideal for city riding.
The motorcycle is built around a 229.65 cc, 4 stroke, air cooled engine which generates a maximum power of 10.5 KW at 7000 rpm and 16.5 KW of torque at 5500 rpm. All this power is transferred to the rear wheel by means of five speed, two stage, constant mesh transmission with wet multi-plate clutch. The unit can propel the motorcycle to a maximum speed of up to 70 Mph.
Other features worthy of being mentioned include aluminum wheels, inverted forks, a slightly raised front fender, wide bars, dual surface tires and a flat seat.
The bike’s price starts at $3,300.
Hit the jump for more information on the Cleveland CycleWerks Ace Standard.
The Cleveland CycleWerks Ace Deluxe is a no-nonsense roadster built on a simple frame and powered by a 229.5 cc, 4 stroke, air cooled engine which generates a maximum power of 10.5 kW at 7000 rpm. The unit is paired with 12 liter fuel tank and is mated to a five speed constant mesh transmission with wet multiplate clutch. As far as performances are concerned, the Clevelnd CycleWerks Ace Deluxe can reach a top speed of 70 mph and an efficiency of 80 mpg.
The Ace Deluxe features aluminum wheels, inverted forks, a slightly raised front fender, wide bars, dual surface tires and a flat comfy seat.
The stopping power is handled by a front and rear disc brakes paired with dual piston calipers.
The Cleveland CycleWerks Ace Deluxe is offered with a base price of $3,300.
Hit the jump for more information on the 2014 Cleveland CycleWerks Ace Deluxe.
With its retro design, low seat height and big wheels, the Cleveland CycleWerks Heist is a rpetty attractive cafe racer that combines the old school lines with modern technologies.
The bike is hand built using the highest quality materials and is equipped with a simple single cylinder, 4 stroke, air cooled OHV engine with 1 intake and 1 exhaust port. The unit delivers a maximum power of 10.5 KW at 7000 rpm and 15.5 Nm of torque at 5500 rpm. The engine’s power is kept in check by a five speed constant mesh transmission which delivers a mileage of over 80 mpg.
The stopping power is assured by a 290mm front and a 240mm rear disc brake.
The motorcycle rides on 21 inch front and 18 inch rear wheels wrapped in T90/90-21" CST DOT and 140/70-18" CST DOT tires, respectively.
Hit the jump for more information on the Cleveland CycleWerks Heist.
The Cleveland CycleWeks Heist SE is a limited production model that has the potential to attract a lot of eyes. It comes with a special set of graphics, a low seat height and a numbered plaque. The motorcycle is available in only 40 units and has a base price of $3,699.
It is also worthy of being mentioned that it is handmade and is propelled by a single cylinder, 4 stroke, air cooled engine with a displacement of 229.5cc. The unit develops a maximum power of 10.5 kWat 7000 rpm and 15.5 Nm of torque at 500 rpm which is more than enough to propel you to a maximum speed of over 70 mph.
The bike rides on 90/90-21" CST DOT front ant 140/70-18" CST DOT rear tires.
Other features worthy of being menti0oned include, front and rear disc brakes, an 8 gallons fuel tank and a five speed transmission with wet, multiplate clutch.
Hit the jump for more information.
The 2013 Cleveland CycleWerks Heist is a practical motorcycle developed with comfort and efficiency in mind.
This vintage-looking café racer is propelled by a four-stroke single cylinder, counterbalanced, 229cc, air cooled engine which is built by LIFAN. It is worthy of being mentioned that this unit has a Honda DNA as is based on a unit built by the Japanese manufacturer back in the ‘70s.
The engine is brought to life by an electric starter and delivers a maximum output of 12.5 hp at 6500 rpm and 11 ft.-lbs. torque at 5000 rpm. These are not impressive numbers, but the good part is that the motorcycle weighs only 272 pounds dry, so the engine has enough grunt to help you deal well with the city traffic.
The 2013 Cleveland CycleWerks Heist is offered with a starting price of $3,195 USD.
Hit the jump for more information on the 2013 Cleveland CycleWerks Heist.