2014 Ducati Diavel Strada
The Strada version of the Ducati Diavel comes with a set of special accessories especially developed to increase the rider’s comfort. Among them you’ll find side bags, a windshield, a new seat and raised handlebars.
The motorcycle sports Ducati’s modern Testastretta 11°, 1198.4 cc, L-twin cylinder, 4 valve per cylinder, Desmodromic, liquid cooled unit that offers a perfect balance between a sporty performance and an enjoyable ride. The unit puts out a maximum power of 119 KW (162 Hp) at 9,500 rpm and 127.5 Nm (94 Lb-Ft) of torque at 8,000 rpm. All this power is handled by a 6 speed transmission with wet, multiplate clutch with hydraulic control.
For enhanced performances, the 2014 Ducati Diavel Strada is also equipped with a Ride-by-Wire (RbW) system which uses three different mappings (sport, touring and city) to regulate the power delivery.
Hit the jump for more information on the 2014 Ducati Diavel Strada.
2014 Ducati Diavel Strada
Engine:Testastretta 11°, L-Twin cylinder, 4 valve per cylinder, Desmodromic, liquid cooled
Horsepower @ RPM:88
Torque @ RPM:94
Energy:Electronic Fuel Injection (EFI)
The power keeps on flowing
The exuberance of the Diavel meets maximum comfort. Innovative solutions and dedicated accessories - side bags, windshield, new seat and raised handlebars - make the Diavel Strada ideal to dominate the asphalt on the open road.
2014 Ducati Diavel Strada Key Features:
• Body: Race titanium matte
• Frame: Racing black
• Wheels: Black
• Touring screen
• Higher handlebars
• Heated grips
• Touring seat
• Passenger back-rest
• 2 x Auxiliary power outlets
• Enhanced generator
• Side luggage
• Revised passenger footpegs
• Revised rear lighting assembly
The Diavel project was born when Ducati designers applied their wish-list of bike “basic instincts” to a blank canvas. With a “what if?” approach to creating a dream bike, they sketched inspiring shapes which became a lower and longer motorcycle. “The challenge of building a muscular silhouette over a pure-bred competition motor had to be met with determination and a delicate touch, and the result is a frontal area that looks like a power athlete on the starting blocks,” explains the team at Ducati Design responsible for the project. “With the front wheel kept close to the Diavel’s body and using the short tail of a sport bike, Ducati were able to blend this muscular design with a chassis that matched.”
The stance of the Diavel is that of readiness, dominance, and confidence bordering on superiority. With lateral radiators adding muscle to its broad “shoulders,” which then taper down across the engine and into the belly-fairing with oil cooler, the athlete took shape. A massive 240 section rear tyre was a perfect example of how Diavel designers used a no-compromise attitude when applying their wish list of features. The sheer width of rubber communicates so much power and style that the R&D team vowed to find a way to make it handle - even if they knew the image would send a seismic shock through the industry. The Diavel is a true Ducati, born from a passion for motorcycling and designed to deliver authentic Ducati performance in every respect.
The Diavel incorporates the very latest in innovative Ducati technologies, including the recently introduced electronic Riding Modes. Selectable from the left-hand switchgear - even while riding - the choice of three pre-set modes are programmed to instantly change the character of the Diavel. The three modes are enabled by combining class-leading technologies such as Ride-by-Wire (RbW) and Ducati Traction Control (DTC).
The Diavels heart is the Ducati Testastretta 11° - developed directly from the incredibly powerful, world-beating race engines of Ducati Corse. Ducati’s Testastretta 11° harnesses the immense power of the Superbike engine and makes it smooth and adaptable, a massive step forward in balancing high-performance with an enjoyable ride. For an engine with brute power on tap when needed and smooth, user-friendliness available for an effortless and comfortable ride, Ducati revised the configuration of the cam timing with particular focus on the valve overlap angle. The overlap angle is defined as the interval of crankshaft rotation, measured in degrees, during which both the intake and exhaust valves are open at the same time. This overlap occurs between the end of the exhaust stroke and the start of the intake stroke. High performance engines, which are subject to compromising smoothness for extreme power delivery, use high values of this parameter in order to benefit from the pressure waves to improve engine performance by maximising volumetric efficiency. On the Testastretta 11° engine, this angle has been reduced from 41°, used in the Testastretta Evoluzione engine which powers the 1198, to 11°. As a result, the fresh inlet charge flow is less compromised by the exiting exhaust gases, resulting in a much smoother combustion in addition to improved fuel economy and lower exhaust emissions.
The Ride-by-Wire (RbW) system is an electronic interface between the Diavel’s twistgrip and engine, which configures an ideal power response depending on the riding mode selected. The twistgrip no longer has a throttle cable connected directly to the throttle body butterflies, but instead delivers a signal to a control unit, which in turn operates the butterfly opening electronically. The RbW system uses three different mappings to regulate the power delivery: 162hp with a sports-type delivery 162hp with a progressive delivery suitable for touring 100hp with progressive delivery for city use
15,000 miles between major services
Constant investment in quality by design, advanced materials and engineering techniques have enabled the distance between major service intervals (valve clearance check) to be increased to a highly competitive 15,000 miles. This has been achieved with the introduction of new valve seat materials, improved combustion efficiency and temperature management designed into the Testastretta 11° engine.
Power and Torque
With its 162hp and colossal 94lb-ft (127.5Nm) of torque, the Diavel Testastretta 11° engine is all about authentic Ducati Desmodromic performance. The revised intake and exhaust ports combined with radical adjustment of the cam timing have enabled Ducati to achieve a fantastic torque curve at low rpm, which remains strong through a wider rev-range. The increase in bottom-end torque is managed by Ducati’s Ride-by-Wire (RbW) system to considerably enhance the Diavel’s effortless ridability, while ensuring plenty of power remains on tap for high-rpm riding.
Twin lateral radiators
The technical solution employed for keeping the frontal lines of the Diavel clean was to place two highly efficient lateral radiators on both sides of the bike. These well-ducted units, located beneath the fuel tank, use aerodynamics to help draw air flow through the radiators and are assisted by high-flow electric fans when required. The design combines form and function to enhance the muscular shape of the bike.
The transmission features an oil bath clutch with “slipper” function and super-light feel at the lever. Its design uses a progressive self-servo mechanism that presses the plates together when under drive from the engine, enabling the reduction of the clutch spring rates. This results in a much lighter clutch lever at the handlebar, ideal in stop-start traffic or during long journeys. When the drive force is reversed (over-run), the same mechanism reduces the pressure on the clutch plates, enabling them to provide a race-like “slipper” action, which reduces the destabilizing effect of the rear-end under aggressive down-shifting and provides a much smoother feeling when closing the throttle or down-shifting under normal riding conditions.
The massive 58mm (2.28in) section exhaust headers lead the 2-1-2 system through power-enhancing equal lengths that enable the Diavel’s efficient power delivery. The engine management system dedicates a lambda probe to each header, providing precise fueling via a large airbox, while the stylish cannon-style, vertically stacked silencers carry catalytic converters to provide Euro 3 conformity and electronically controlled mid-section valve optimises exhaust pressures throughout the rev-range.
The low seat height at 770 mm makes the bike accessible to everyone. In addition, new ergonomic parameters offer the rider an unprecedented level of comfort and control. The special shape of the tourer seat ensures great comfort, while the handlebar has been raised by 15 and moved back by 60 mm mm to promote a straighter, more relaxing riding position.
The Diavel rolls on stunning, custom 14-spoke wheels with machine-finished detailing. The front rim is 3.5x17, while the rear, which is “flow-formed” for enhanced structure and lightness, boasts a massive 8x17 rim.
Fuel tank and air intakes
The Diavel’s 17l (4.5 gal US) fuel tank represents an integral part of the bike’s overall styling. Its wide, long lines sweep down from the headlamp assembly into the seat and rear sub-frame to create a seamless profile. While the focal point of the tank is the high resolution display panel, the steel tank skin and well-sculpted knee panels add a solid feel to the Diavel and a high tech composite look to the Diavel Carbon. On each side of the front of the tank are massive air intakes formed in aluminium to feed the engine’s large airbox.
Diavel frame assembly
The signature Ducati Trellis frame uses large diameter, light gauge tubing with two lateral die-cast aluminium sections that flow into the rear subframe. This achieves massive torsional rigidity while remaining lightweight and compact. The two sections form a rear-end structure by attaching onto either side of a complex techno-polymer component.
The Diavel front brakes use Brembo’s incredibly powerful Monobloc callipers, which deliver outstanding performance actuated by new integral alloy master cylinders with unique shape reservoirs sporting milled tops. The 4-piston, twin radially-mounted callipers grip 320mm discs, while a single 265mm disc on the rear is gripped by a two piston calliper, also by Brembo.
The long, die-cast aluminium, single-sided swingarm provides great “feel” at the rear-end with a wheelbase of 1590mm (62.6in) and a stance that provides lean angles of up to 41°.
Sachs rear suspension
The Diavel have a Sachs rear suspension unit slung low under the chassis in a horizontal position, operated by a progressive pull-rod linkage from the swingarm. Adjustable in compression and rebound damping, the unit uses a handy control for easy spring pre-load adjustment.
The tourer character of the Diavel Strada is enhanced by details designed to improve the travel experience of rider and passenger. Heated grips improve comfort in adverse weather conditions, whereas new fixed pillion rider footpegs, luggage system with integrated grab rails and dedicated backrest increase stability and passenger comfort.
The new, broader touring windscreen blends seamlessly into the aggressive silhouette of the Diavel Strada and affords excellent wind protection, offering an enhanced feeling of comfort. Comfort is brought to the next level by new ergonomics based on the dedicated tourer seat and the new handlebar, which is raisedby 15 mm and moved back by 60mm to ensure total, relaxed control for superior riding pleasure.
Ducati Traction Control (DTC)
The racing-derived Ducati Traction Control (DTC) is a highly intelligent system which acts as a filter between the rider’s right hand and the rear tyre. Within milliseconds, DTC is able to detect and control rear wheel-spin, considerably increasing the bike’s active safety and performance. The system offers eight levels of “sensitivity”, each programmed with an amount of rear wheel-spin tolerance. These levels are in line with progressive levels of riding skills classified from one to eight. Level one is programmed to offer the least amount of interaction for sport-oriented riders, while level eight uses the most amount of interaction for complete confidence. DTC levels are factory pre-set in each of the three Riding Modes, but can be individually customised and saved to suit the rider by accessing the new user-friendly set-up menu. A “default”option is available to easily return all settings to factory pre-sets.
The Diavel is equipped with the latest, most compact, Ducati Bosch-Brembo ABS system as original equipment, providing a major contribution towards performance control. Top Brembo components combined with Bosch ABS, the special Diavel chassis configuration and Pirelli’s Enhanced Patch Technology (EPT) result in a braking performance even greater than that of the awesome Ducati Superbikes.
The Diavel Strada shows off its Touring soul sporting two 41-litre side panniers with a dynamic-looking style. The luggage system includes integrated grab rails for the passenger to share his riding passion with a passenger.
The two-level tourer seat with high-density foam padding fitted to the Diavel Strada offers improved ergonomics and comfort for rider and passenger over long journeys. Weight distribution has been revised to keep the rider farther away from the tank for better fit and a comfortable riding position that provides total control of the bike. Passenger comfort is further enhanced by the dedicated backrest - fitted as standard - that also helps keep passenger weight off the rider’s back.
The upper LCD display is mounted on the bar-riser and provides main information such as speed and rpm, in addition to warning lights, time and temperature. The lower, full colour Thin Film Transistor (TFT) display is styled into the fuel tank and provides an incredibly clear account of current Riding Mode, gear selection and DTC setting as well as total mileage and trips. Used on mobile phones and computers, TFT technology is a variant of LCD and displays easy-to-read high resolution graphics. The Diavel’s TFT display goes one step further by using the sensitivity of its surrounding light to decide upon black or white background colour. When stationary, the lower display also doubles as the latest user-friendly control panel to personalise DTC and RbW settings within each Riding Mode before saving.
The Diavel uses two clear vertical strips of LED lighting to provide tail and brake light illumination as well as directional indicators. The strips follow the precise line of the under-seat panelling, providing great visibility of the rear-end while keeping the external lines of the bike clean. The front directional indicators are clear lens LED strips mounted vertically down the leading edge of the lateral radiator covers. The headlamp gives the Diavel immediate Ducati identity and is supported by an aluminium outer body. The light uses high and low beam double reflectors to illuminate the road ahead, in addition to incorporating a horizontal strip of LED positioning lights for optimum visibility.
The Diavel Strada has two 12 V power outlets, one on each side just below the rider’s seat.
As a technical partner of Ducati, Pirelli co-operated with the Diavel engineers to develop the new Pirelli Diablo Rosso II tyres. The front wheel features a conventionally sized 120/70x17 tyre with re-designed tread for the utmost wet traction. At the rear end, the sport profile and the unusual, custom-style width of the 240/45x17 rear tyre represent the state of the art in tyre technology.
The massive rear tyre uses dual compound technology for improved grip at the meanest lean angles, while ensuring high mileage, and EPT (Enhanced Patch Technology) to maintain the largest possible contact patch at any lean angle. Tread pattern and compounds combine to ensure superior performance under all conditions and especially on wet pavement.
The Diavel’s ignition is actuated by an electronic key in the rider’s pocket, which communicates with the motorcycle when within a distance of approximately 2 metres (6.5ft). The motorcycle recognises the dedicated key code and automatically enables the bike’s systems. Pressing the key-on switch then activates all systems to “on” and the engine is ready to be started. The electronic key, which internally consists of a radio circuit, externally doubles as a mechanical flip-key, required to open the seat and fuel tank cap. When parking the motorcycle, an electronic lock can be actuated on the steering simply by applying full steering-lock and pressing the ignition-off button a second time.
The Diavel handlebar shape and arrangement leaves the rider feeling comfortable and in command. Wide, tapered section aluminium bars with new custom designed provide a clean and minimalist set-up, while stylish, forged-aluminium supported mirrors deliver a generous view to the rear. Switchgear control is taken care of by Ducati’s latest and most minimalist design with slim-line bodies housing easy-to-use switches and buttons and a unique weapons-like “trigger catch” that slides down to cover the starter button when activating the kill-switch. While the indicator cancel button doubles as a scroll-and-select for fast and easy Riding Mode changes, switches above and below serve to navigate the new high-resolution display control panel.
Innovative number plate mount
Employing the double strip of multi-functional LEDs for the rear lighting of the Diavel required an innovative solution for the mounting of the number plate. The unique design uses mounts on the rear hub of the single-sided swingarm to extend an elegant and Ducati signature Trellis framework around the 240 section rear tyre, enabling a central mounting of the plate. The framework carries a hidden power feed to dedicated LED illumination for the number plate, eliminating any reliance on the main rear lights and creating a clean feature around the rear of the seat. This design solution represents the first of its kind and an example of the incredible attention to the Diavel’s detail.
|Engine Type||Testastretta 11°, L-Twin cylinder, 4 valve per cylinder, Desmodromic, liquid cooled|
|Bore x Stroke||106 x 67.9mm|
|Power||119 kW (162 hp) @ 9,500 rpm|
|Torque||127.5 Nm (94 lb-ft) @ 8,000 rpm|
|*Technical data referring to power and torque was measured on an engine test stand at Ducati.|
|Fuel injection||Electronic fuel injection system, elliptical throttle bodies with RbW|
|Exhaust||Lightweight 2-1-2 system with catalytic converter and two lambda probes. Twin aluminium mufflers|
|Primary drive||Straight cut gears, ratio 1.84:1|
|Ratio||1=37/15 2=30/17 3=27/20 4=24/22 5=23/24 6=22/25|
|Final drive||Front sprocket 15; Rear sprocket 43|
|Clutch||Light action, wet, multiplate clutch with hydraulic control. Self-servo action on drive, slipper action on over-run.|
|Frame||Tubular steel Trellis frame|
|Front suspension||Marzocchi 50mm fully adjustable usd forks|
|Front wheel||14-spoke in light alloy 3.50 x 17|
|Front Tyre||120/70 ZR 17 Pirelli Diablo Rosso II|
|Rear suspension||Progressive linkage with fully adjustable monoshock. Remote spring preload adjustment. Aluminium single-sided swingarm|
|Rear wheel||14-spoke in light alloy 8.00 x 17|
|Rear tyre||240/45 ZR17 Pirelli Diablo Rosso II|
|Front wheel travel||120mm (4.7in)|
|Rear wheel travel||120mm (4.7in)|
|Front brake||2 x 320mm semi-floating discs, radially mounted Monobloc Brembo callipers, 4-piston with ABS|
|Rear brake||265mm disc, 2-piston floating calliper with ABS|
|Instrumentation||Handlebar mounted instrumentation with LCD display: speed, rpm, time, coolant temp. Warning lights for: Neutral, turn signals, high-beam, rev-limit, DTC intervention, ABS status, oil pressure, fuel reserve. Tank mounted instrumentation with TFT colour display: gear selected, air temp, battery voltage, trips 1 & 2, fuel reserve trip, average and actual fuel consumption and speed, trip time, scheduled maintenance. Full status and/or management of Riding Modes, DTC, RbW and ABS.|
|Dry weight||216kg (476lb)|
|*Weight data refers to the dry weight of the motorcycle without battery, lubricants and coolants for liquid-cooled models.|
|Wet weight (KERB)||245kg (540lb)|
|*Kerb weights indicate total bike weight with all operating consumable liquids and a fuel tank filled to 90% of capacity (as per EC standard 93/93).|
|Seat height||770mm (30.3in)|
|Fuel tank capacity||17l - (4.5 US gal)|
|Number of seats||Dual seat|
|Standard Equipment||Riding Modes, Power Modes, Ducati Safety Pack (ABS + DTC), RbW. 41 l (10.8 gal) side panniers, tourer seat, touring windshield, passenger back-rest, heated grips,two 12V power outlets, handlebar: + 15mm rise and + 60mm backward|
|Warranty||24 months unlimited mileage|
|Maintenance service intervals||12.000km (7.500m) / 12 months|
|Valve clearance check||24.000km (15,000m)|
|Emissions and Consumption||Standard Euro 3|