The KTM 450 EXC Six Days is ready for the toughest adventures you can throw at him. It features a unique orange powder-coated frame which houses a potent 449.3 cc, 1 cylinder, 4 stroke, water cooled engine. The unit is fed by a slim 9.5 liter fuel tank and is kept under control by a modern transmission with wet multi-disc clutch.

The KTM 450 EXC Six Days was built with comfort in mind, so it features slim ergonomics and good contact points between rider and machine. You also get a tapered Neken handlebar made from high-strength aluminium alloy and a comfy Camel SXS seat.

Other features offered by the KTM 450 EXC Six Days include 4CS closed-cartridge forks, new machined triple clamps, a skid plate and an exhaust silencer with Six Days anodising (anthracite) and Six Days logo.

Hit the jump for more information on the KTM 450 EXC Six Days.

  • 2014 KTM 450 EXC SIX DAYS
  • Year:
  • Make:
  • Engine:
    1-cylinder 4-stroke engine, water-cooled
  • Transmission:
  • Energy:
    Electronic Fuel Injection (EFI)
  • Displacement:
    449 cc
  • Top Speed:
    120 mph (Est.)


2014 KTM 450 EXC SIX DAYS High Resolution Exterior
- image 546218

2014 KTM 450 EXC SIX DAYS: Rock-Hard

The 450 EXC - "READY TO RACE" for the world’s largest enduro competition, the "International Six Days Enduro". Six days in succession, over a thousand offroad kilometres, 40 hours in the saddle - a gruelling test, not only for the rider. A whole package of high-quality special options makes the KTM 450 EXC fit for this ruthless contest, in which more than half the starters bank on KTM every year. 450 EXC Six Days - only authentic with the orange powder-coated frame of the KTM Factory Team. No other brand is anywhere near as strongly and successfully represented in offroad sport as KTM. This is particularly clear in the world’s largest enduro competition, the "International Six Days Enduro" (ISDE), where more than 500 enduro riders from over 30 countries compete for the World Team Championship. A marathon enduro race that places just as high demands on the motorcycles as it does on the riders. That’s why year after year more than half the competitors place their trust in the tried and tested products from Austria. In 2013, the Six Days Race will be held on the Italian island of Sardinia. Those who want to arrive safely at the finish on the demanding, rocky terrain will have to make no compromises. In the form of the new Six Days models, KTM offers well-proven, robust machines that fully satisfy the high demands of this extraordinarily tough competition.

2014 KTM 450 EXC SIX DAYS Features and Benefits:

2014 KTM 450 EXC SIX DAYS High Resolution Exterior
- image 546216

Superior chassis:

2014 KTM 450 EXC SIX DAYS High Resolution Exterior
- image 546215

Individual suspension settings
Each EXC model has its own individual suspension settings, optimally tuned to weight and engine. At the rear, a PDS shock absorber from WP Suspension works with a direct linkage to the upper side of the swingarm. The wide range of setting options for rebound damping and high- and low-speed compression damping are standard on KTM bikes.

Telescopic fork
The KTM Six Days models are equipped with a 48 mm 4CS closed-cartridge fork from WP Suspension. The 4-chamber technology (4CS) patented by WP not only provides a key benefit in terms of responsiveness and consistent damping characteristics, it is also lighter and oil services prove to be far simpler than on the conventional closed-cartridge versions. The setting has been made slightly stiffer and sportier for the 2014 model year to give the fork even more reserves on extremely rutted tracks as well. Naturally, the setting can easily be adapted to track and rider in a matter of a few clicks at the top of the fork: compression damping on the left-hand shaft, rebound damping on the right - another advantage of the 4CS technology.

In keeping with KTM tradition, the frames are made from high quality, lightweight, chrome-molybdenum steel profiles. In conjunction with the rear PDS damping system, they are designed for optimum absorption of shocks introduced into the frame by the rear wheel. In response to the trend for aluminium frames followed by our rivals, we supply a high-tech steel frame that weighs approx. 0.5 kg less than the lightest competitor. Moreover, it’s easier to maintain, work on it is simpler and it provides more space for the fuel tank and other components.

All KTM EXC models are designed with a lightweight, cast aluminium swingarm featuring direct linkage of the PDS shock absorber on the upper side. The aluminium casting process allows production of a single-piece swingarm with unlimited geometric possibilities and reduces inconsistencies caused by welding work. The swingarm has been designed to provide targeted flexibility on the one hand, thereby bolstering the suspension, and high torsional stiffness on the other.

Triple clamp
Meticulously finished triple clamps, machined from a solid block: Not only do they look classy in anodised orange; they are also designed in such a way that they support the responsiveness and sliding behaviour of the new fork with their special shaping. The attachment points on the lower triple clamp have been adapted for new front fenders for the 2014 model year.

High quality wheels
The high quality, alloy wheels from GIANT made of extremely stable 7050 aluminium, featuring exclusive Six Days lettering and CNC-machined hubs, are standard on all KTM Six Days models. The MAXXIS FIM tyres provide excellent traction, very precise directional control and a long service life. An additional Six Days standard feature: the Supersprox 2-piece rear sprocket with steel outer ring and aluminium star.

High-tech brakes from Brembo have always been standard equipment on KTM offroad bikes and, together with the lightweight wave brake discs, they are the measure of all things in terms of brake technology. A new handbrake armature has been employed for the 2014 model year, with new remote reservoir, smaller brake piston diameter and a new lever with optimised lever kinematics. As a result and thanks to optimised sintered brake pads (Toyo B169), the performance and application of the front brake have been perceptibly improved again.


2014 KTM 450 EXC SIX DAYS Exterior
- image 546211

The slim 9.5-litre tanks are made from lightweight, transparent polyethylene, allowing the fuel level to be seen from the outside. The tried and tested bayonet filler cap can be opened easily with only a quarter turn and features the proven safety mechanism to prevent unintentional twisting.

Improved performance:

2014 KTM 450 EXC SIX DAYS Exterior
- image 546207

Cylinder head
The cylinder head is equipped with an overhead camshaft, which has been reduced in weight by approx. 10% for MY 2014, as well as two titanium intake valves and two steel exhaust valves. The weight-optimised valve train (40% lighter valve springs and valve spring retainers) results in lower friction and therefore both improved performance and reduced engine braking. Designed in accordance with the latest racing standards, a reinforced cylinder head gasket now also guarantees even greater durability in extreme conditions. The auto-decompressor has also been reinforced to optimise its durability.

The engine management system from Keihin with electronic fuel injection and 42 mm throttle body ensures spontaneous, powerful responsiveness and handling, along with maximum performance. Automatic temperature and altitude compensation are state of the art. With an optional map-select switch (PowerParts), a variety of different engine characteristics can be selected.

Developed for tough enduro conditions, the 449.3cc SOHC engine is characterised by an extremely compact design, very easy maintenance and outstanding robustness, with weight kept to a minimum. Together with the Keihin fuel injection system, this results in unrivalled performance and rideability - specially designed for enduro use.

DDS clutch
The single-piece outer hub of the further optimised DDS (Damped Diaphragm Steel) clutch is machined along with its primary gear from a solid block of high-strength steel. This process guarantees unbeatable reliability and allows the engine to be extremely narrow thanks to the compact, rivetless design of the outer clutch hub. In addition, this design allows use of thin steel discs, which also contributes to the compact dimensions of the clutch. The diaphragm spring enables implementation of an additional hub damping mechanism - a benefit in terms of traction and gearbox wear. Furthermore, an optimised inner clutch hub improves the durability of the clutch. Finally, in conjunction with the diaphragm spring, the hydraulic clutch actuation system from Brembo ensures very smooth and very precise clutch control.

Adjustable ignition curve
By opening and closing a plug connection on the KTM 450 EXC Six Days, a choice can be made between the standard ignition curve and a softer version. Those who prefer even greater convenience can buy a switch from the PowerParts range.

Slim ergonomics for perfect control:

2014 KTM 450 EXC SIX DAYS High Resolution Exterior
- image 546201

The KTM 450 EXC Six Days has bodywork with extremely slim ergonomics and excellent contact points between rider and machine. It provides unlimited freedom of movement. For MY 2014, the bike excels with the graphics restyled in 2013 in the colours of the ISDE in Germany.

The 450 EXC Six Days is equipped with a tapered Neken handlebar made from high-strength aluminium alloy. In accordance with the proven KTM standard, the handlebar can be fixed in a choice of four positions. Redesigned handguards made from ultra-sturdy 2-component plastic have been fitted for the 2014 model year, ensuring more efficient hand protection. The newly installed clutch armature from Brembo has been adapted to the appearance of the brake armature.

With exclusive special equipment:

2014 KTM 450 EXC SIX DAYS High Resolution Exterior
- image 546199

Six days equipment
• 4CS closed-cartridge fork from WP Suspension with revamped settings
• Frame with high-quality orange coating in race look
• New machined triple clamps, orange anodised
• Black anodised handlebar with KTM Six Days logo
• Supersprox 2-piece rear sprocket with steel outer ring and aluminium star
• Solid rear brake disc (no slots/holes)
• Camel SXS seat with optimised foam core
• Skid plate
• Radiator guard
• Exhaust silencer with Six Days anodising (anthracite) and Six Days logo
• Wheels featuring high quality, black anodised rims made by GIANT with Six Days logo and black spokes
• Quick-release spindle at the front
• Orange radiator grille
• Orange chain guide
• New speedo from MAE
• Exclusive Six Days graphics


Engine 1-cylinder 4-stroke engine, water-cooled
Displacement 449.3 cm³
Bore 95 mm
Stroke 63.4 mm
Starting aid Electric starter/Kickstarter
Engine lubrication Forced oil lubrication with 2 Eaton pumps
Primary ratio 32:76
Secondary ratio 14:52 (13:52)
Cooling system Liquid cooling system, continuous circulation of cooling liquid with water pump
Clutch Wet multi-disc clutch DDS / Brembo hydraulics
Ignition system Contactless, controlled, fully electronic ignition system with digital ignition timing adjustment
Frame Central tube frame made of chrome molybdenum steel tubing
Shock absorber WP Suspension PDS 5018 DCC
Suspension travel Front 292 mm
Suspension travel Rear 335 mm
Brake system Disc brakes, brake calipers on floating bearings
Brake discs - diameter Front 260 mm
Brake discs - diameter Rear 220 mm
Chain 5/8 x 1/4"
Steering head angle 63.5°
Wheelbase 1,482±10 mm
Ground clearance, unloaded 345 mm
Seat height, unloaded 970 mm
Total fuel tank capacity, approx. 9 l Unleaded premium fuel (95 RON)
Weight without fuel, approx. 111 kg
What do you think?
Show Comments
Motorcycle Finder: